Difficulty

Moderate

Steps

4

Time Required

                          30 minutes - 1 hour

Sections

1

  • Battery
  • 4 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackNokia 3.1

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

You will need a model HE336 battery replacement.

What you need

Step 1

              Battery
  • First, remove the SIM and SD card trays.

First, remove the SIM and SD card trays.

1024

Step 2

              Open the back cover
  • Try to use a thin tool like a razor blade to start to pry open the back cover.
  • When you opened it up just a little bit put a plastic card or a plastic opening tool inside the gap.
  • Using the plastic tool slowly make your way around the back cover. You can also use a guitar pick or similar.
  • Hint: the back cover is attached to the body with several plastic noses as well as a thin strip of adhesive. The cover is quite flexible and sturdy.

Try to use a thin tool like a razor blade to start to pry open the back cover.

When you opened it up just a little bit put a plastic card or a plastic opening tool inside the gap.

Using the plastic tool slowly make your way around the back cover. You can also use a guitar pick or similar.

Hint: the back cover is attached to the body with several plastic noses as well as a thin strip of adhesive. The cover is quite flexible and sturdy.

Step 3

              Remove logic board cover
  • Remove the seven Torx T5 screws from the logic board cover.
  • Remove the logic board cover.
  • Lift up the battery connector from the logic board.

Remove the seven Torx T5 screws from the logic board cover.

Remove the logic board cover.

Lift up the battery connector from the logic board.

Step 4

              Remove battery adhesive strips
  • At the bottom end of the battery you will see two black ends of adhesive strips showing up from underneath the battery.
  • Slowly pull at those adhesive strip ends to be able to lift out the battery.

At the bottom end of the battery you will see two black ends of adhesive strips showing up from underneath the battery.

Slowly pull at those adhesive strip ends to be able to lift out the battery.

To reassemble your device, follow these instructions in reverse order. Also don’t forget some double-faced adhesive tape to fixate the new battery.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.

Author

                                      with 1 other contributor 


                    Baschtl

Member since: 12/02/2012

1,405 Reputation

                                      5 Guides authored                  



                       Badges:
                       17







                                                        +14 more badges