Difficulty

Easy

Steps

5

Time Required

                          40 minutes - 1 hour

Sections

1

  • LCD Display
  • 5 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackNokia 2630b

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              LCD Display
  • Remove the Back cover by Pressing the release buttons located on either side of the battery cover
  • Now Remove The Battery and Simcard from the slots

Remove the Back cover by Pressing the release buttons located on either side of the battery cover

Now Remove The Battery and Simcard from the slots

1024

Step 2

  • Remove the two screws on either side of the back side using the microscrewdriver using the T5 bit
  • Now Remove the Front key panel from the Main Board Carefully using the Plastic Opening Tools

Remove the two screws on either side of the back side using the microscrewdriver using the T5 bit

Now Remove the Front key panel from the Main Board Carefully using the Plastic Opening Tools

Step 3

  • Now Remove the four screws in the front side of the main board
  • Now push the Board from the Battery slot side and carefully By using the Plastic Opening Tools Separate the board from the back case or rear case

Now Remove the four screws in the front side of the main board

Now push the Board from the Battery slot side and carefully By using the Plastic Opening Tools Separate the board from the back case or rear case

Step 4

  • Now Gently Separate the lock at the right side to remove the outer cover of the Main Board
  • !!!! Be Cautious that the key panel is attached at the other end

Now Gently Separate the lock at the right side to remove the outer cover of the Main Board

!!!! Be Cautious that the key panel is attached at the other end

Step 5

  • Remove the Chip which is attached to the main board
  • Now we can separate the display from the main board and we can replace it with the new display.

Remove the Chip which is attached to the main board

Now we can separate the display from the main board and we can replace it with the new display.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 1 other contributor 


                    LOGESAM

Member since: 12/28/2015

123 Reputation

                                      1 Guide authored                  



                       Badges:
                       11







                                                        +8 more badges