Difficulty
Moderate
Steps
18
Time Required
Suggest a time??
Sections
3
- Battery Case
- 2 steps
- Screen / Front Case
- 14 steps
- Back Case
- 2 steps
Flags
6
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Confusing Text
Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!
Missed a Step
Oops! This guide is currently missing some important steps.
Slice and Dice
The steps in this guide should be split up and made into a series of prerequisite guides.
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
BackNokia 2630b
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
In this guide, we show how to unscrew and remove the back case of the Nokia 2630b. This enables access to the motherboard, antenna, and LCD screen of the phone.
What you need
Step 1
Battery Case
- Press each release button on either side of the battery cover and simultaneously remove the battery cover from the phone.
Press each release button on either side of the battery cover and simultaneously remove the battery cover from the phone.
1024
Step 2
- Pull the battery out of the phone with your fingers.
Pull the battery out of the phone with your fingers.
Step 3
Screen / Front Case
- Remove the two screws on either side of the battery case using the microscrewdriver using the T5 bit
- The T5 bit has a star shaped end and has “T5” engraved on the side of the bit for easy identification
- NOTE: Keep the screws in a safe place while you continue working.
Remove the two screws on either side of the battery case using the microscrewdriver using the T5 bit
The T5 bit has a star shaped end and has “T5” engraved on the side of the bit for easy identification
NOTE: Keep the screws in a safe place while you continue working.
Step 4
- Separate the front case from the back case using the iPod opener
- NOTE: The keypad is a loose piece and may fall out
Separate the front case from the back case using the iPod opener
NOTE: The keypad is a loose piece and may fall out
Step 5
- Remove screws using the same T5 screw bit to release the computer chip from the case
- NOTE: Keep the screws in a safe place while you continue working
Remove screws using the same T5 screw bit to release the computer chip from the case
NOTE: Keep the screws in a safe place while you continue working
Step 6
- Carefully lift the black frame off the screen with your fingers
Carefully lift the black frame off the screen with your fingers
Step 7
- Carefully remove the computer chip and screen out of the black case with your fingers
Carefully remove the computer chip and screen out of the black case with your fingers
Step 8
- The screen is attached to the motherboard by an orange ribbon
- Carefully detach the ribbon from the motherboard using your fingers
The screen is attached to the motherboard by an orange ribbon
Carefully detach the ribbon from the motherboard using your fingers
Step 9
- Reattach new screen by connecting the orange ribbon to the computer chip
Reattach new screen by connecting the orange ribbon to the computer chip
Step 10
- Place computer chip and screen back into black case
Place computer chip and screen back into black case
Step 11
- Place black frame back over screen
Place black frame back over screen
Step 12
- Carefully place keypad back in place
Carefully place keypad back in place
Step 13
- Snap the front case back in place with the bottom case with your fingers
Snap the front case back in place with the bottom case with your fingers
Step 14
- Reassemble screws with microscrewdriver
Reassemble screws with microscrewdriver
Step 15
- Slide battery back into place
Slide battery back into place
Step 16
- Snap battery cover back into place
Snap battery cover back into place
Step 17
Back Case
- Locate the four screws that secure the back case to the rest of the phone.
- Unscrew all four screws using a “T-5” star shaped screw driver, turning counter-clockwise.
Locate the four screws that secure the back case to the rest of the phone.
Unscrew all four screws using a “T-5” star shaped screw driver, turning counter-clockwise.
Step 18
- DO NOT PULL APART! There is a wire attaching the speaker to the rear case. It is very important to NOT sever this connection. Because of this, the rear case does not completely detach from the rest of the phone.
- Holding the rear case, applying pressure to the back of the phone near the location of the battery in order to separate the two components.
DO NOT PULL APART! There is a wire attaching the speaker to the rear case. It is very important to NOT sever this connection. Because of this, the rear case does not completely detach from the rest of the phone.
Holding the rear case, applying pressure to the back of the phone near the location of the battery in order to separate the two components.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Eric
Member since: 04/07/2011
51 Reputation
4 Guides authored
Badges:
5
+2 more badges
Team
Cal Poly, Team 9-61, Walters Spring 2011
Member of Cal Poly, Team 9-61, Walters Spring 2011
CPSU-WALTERS-S11S9G61
5 Members
5 Guides authored
