Nokero Sunray Pro Power Panel Capacitor Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          15 - 30 minutes            

Sections

2

• Front and Back Case
• 4 steps
• Capacitor
• 2 steps

Flags

0

• BackNokero SunRay Pro Power Panel

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Front and Back Case               

• Turn over the device so that the back of the device is facing up.

Turn over the device so that the back of the device is facing up.

1024

Step 2

• Insert the first plastic opening tool along the side to pry open the case.
• Sliding the plastic opening tool, while inserted, along the seam may help the removal process.
• Use a second plastic opening tool to help separate the remaining seams.

Insert the first plastic opening tool along the side to pry open the case.

Sliding the plastic opening tool, while inserted, along the seam may help the removal process.

Use a second plastic opening tool to help separate the remaining seams.

Step 3

• There is a long strip of double sided adhesive foam tape that prevents the back case from easily being removed.
• Pull the back case off by applying steady pressure to remove it from the adhesive foam tape.

There is a long strip of double sided adhesive foam tape that prevents the back case from easily being removed.

Pull the back case off by applying steady pressure to remove it from the adhesive foam tape.

Step 4

• Use the Phillips precision screwdriver to unscrew the two 5.0 mm Phillips screws from the circuit board.
• Remove the solar panel and circuit board from the front case.

Use the Phillips precision screwdriver to unscrew the two 5.0 mm Phillips screws from the circuit board.

Remove the solar panel and circuit board from the front case.

Step 5

              Capacitor               

• Use the soldering station to desolder the two contact points around the connections of the capacitor to loosen the metal.

Use the soldering station to desolder the two contact points around the connections of the capacitor to loosen the metal.

Step 6

• Pull the capacitor through the circuit board to remove it.

Pull the capacitor through the circuit board to remove it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Nicholas Orr                     

Member since: 01/20/2015

229 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       USF Tampa, Team 9-3, Blackwell Winter 2015                        

                                                  Member of USF Tampa, Team 9-3, Blackwell Winter 2015 



                    USFT-BLACKWELL-W15S9G3                     


                                            3 Members                     


                                            3 Guides authored