Difficulty
Easy
Steps
7
Time Required
Suggest a time??
Sections
1
- Batteries
- 7 steps
Flags
Featured Student Guide
This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.
BackNokero Shavano N220
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Batteries
- Use one hand to hold the device still and the other to remove the lid by turning it clockwise using your index finger and thumb.
Use one hand to hold the device still and the other to remove the lid by turning it clockwise using your index finger and thumb.
1024
Step 2
- Using your index finger and thumb, squeeze the top and bottom of the plastic bezel together, and lift it off of the device.
Using your index finger and thumb, squeeze the top and bottom of the plastic bezel together, and lift it off of the device.
Step 3
- Insert a spudger into the slot at the bottom of the lower battery cover, and pry the cover up.
- You only need to apply minimal pressure to lift the cover. If you force it too hard, you may snap the plastic.
- Repeat for the second battery cover.
Insert a spudger into the slot at the bottom of the lower battery cover, and pry the cover up.
You only need to apply minimal pressure to lift the cover. If you force it too hard, you may snap the plastic.
Repeat for the second battery cover.
Step 4
- Use a spudger or your fingers to remove the two batteries.
Use a spudger or your fingers to remove the two batteries.
Step 5
- Now take your new batteries or let the old ones charge and reinsert them.
- Follow the picture of the battery on the inside of the device.
Now take your new batteries or let the old ones charge and reinsert them.
Follow the picture of the battery on the inside of the device.
Step 6
- Once you have put in both sides, insert the covers.
- Match the ends and it should just pop into place.
Once you have put in both sides, insert the covers.
Match the ends and it should just pop into place.
Step 7
- Almost there, now take the white piece that you set aside and squeeze one side once again using your pointer finger and thumb to put it in.
- Take the lid and turn it counter clockwise using your index finger and thumb.
Almost there, now take the white piece that you set aside and squeeze one side once again using your pointer finger and thumb to put it in.
Take the lid and turn it counter clockwise using your index finger and thumb.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 5 other contributors
Erica Hill
Member since: 10/28/2013
523 Reputation
5 Guides authored
Badges:
8
+5 more badges
Team
University of Maryland, Team 4-3, Vijaybhaskar Fall 2013
Member of University of Maryland, Team 4-3, Vijaybhaskar Fall 2013
UMD-VIJAYBHASKAR-F13S4G3
3 Members
5 Guides authored