Difficulty
Very easy
Steps
4
Time Required
5 minutes
Sections
1
- Nokero N222-Huron Mounting Technique
- 4 steps
Flags
0
BackNokero N222-Huron
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Nokero N222-Huron Mounting Technique
- Place the mounting bracket in the desired location and mark the center location. This is where the screw will be placed.
- It is optional to drill a pilot hole for the screw if splitting is a concern (usually for mounting in wood).
Place the mounting bracket in the desired location and mark the center location. This is where the screw will be placed.
It is optional to drill a pilot hole for the screw if splitting is a concern (usually for mounting in wood).
1024
Step 2
- Place the screw through the bracket, as shown, and screw it into the marked or drilled location.
Place the screw through the bracket, as shown, and screw it into the marked or drilled location.
Step 3
- Make sure the bracket is facing in the desired direction before tightening the screw.
- When the Nokero logo is facing forward, the light will pivot forward and backward.
Make sure the bracket is facing in the desired direction before tightening the screw.
When the Nokero logo is facing forward, the light will pivot forward and backward.
Step 4
- Place the light in the bracket as shown and turn clockwise until it is secure.
Place the light in the bracket as shown and turn clockwise until it is secure.
To remove or change the fixed mount for your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Vinny Capone
Member since: 10/18/2013
549 Reputation
5 Guides authored
Badges:
7
+4 more badges
Team
UMass Dartmouth, Team 2-4, Gulbrandsen Fall 2013
Member of UMass Dartmouth, Team 2-4, Gulbrandsen Fall 2013
UMASSD-GULBRANDSEN-F13S2G4
3 Members
5 Guides authored