Difficulty
Moderate
Steps
5
Time Required
20 minutes
Sections
1
- Console Outer Case
- 5 steps
Flags
Featured Student Guide
This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.
BackNintendo Wii U
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Console Outer Case
- With the bottom of the console facing up, remove the following 6 screws hidden underneath the white square stickers:
- Three 5.1mm Phillips #000 screws
- Two 6.1mm Tri-wing Y0 screws
- One 13.2mm Tri-wing Y1 screw
With the bottom of the console facing up, remove the following 6 screws hidden underneath the white square stickers:
Three 5.1mm Phillips #000 screws
Two 6.1mm Tri-wing Y0 screws
One 13.2mm Tri-wing Y1 screw
1024
Step 2
- Rotate the console 180 degrees so that the exhaust vents are facing you.
- Remove the two 7.1mm Phillips #00 screws.
Rotate the console 180 degrees so that the exhaust vents are facing you.
Remove the two 7.1mm Phillips #00 screws.
Step 3
- On the side opposite of the exhaust vents, slide the cover faceplate towards the back of the console and pull upwards to release it.
On the side opposite of the exhaust vents, slide the cover faceplate towards the back of the console and pull upwards to release it.
Step 4
- On the bottom of the console beneath the previously removed faceplate, remove the three 13.2mm Tri-wing Y1 screws.
On the bottom of the console beneath the previously removed faceplate, remove the three 13.2mm Tri-wing Y1 screws.
Step 5
- On the back of the console, lift up and release the main top cover.
On the back of the console, lift up and release the main top cover.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
23 other people completed this guide.
Author
with 5 other contributors
Kim Arre
Member since: 01/11/2013
4,403 Reputation
8 Guides authored
Badges:
20
+17 more badges
Team
Cal Poly, Team 17-20, Forte Winter 2013
Member of Cal Poly, Team 17-20, Forte Winter 2013
CPSU-FORTE-W13S17G20
5 Members
28 Guides authored