Difficulty
Moderate
Steps
5
Time Required
5 minutes
Sections
2
- Front Cover Plate and Batteries
- 4 steps
- Speaker
- 1 step
Flags
1
Featured Student Guide
This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.
BackWii Remote
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front Cover Plate and Batteries
- Flip the Wii Remote over so the battery cover faces you.
- Push up on the bottom tab.
- Remove the battery cover.
Flip the Wii Remote over so the battery cover faces you.
Push up on the bottom tab.
Remove the battery cover.
1024
Step 2
- Remove the first battery by pressing down on the positive end and pulling the battery out.
- Remove the second battery by pushing up on the positive end and pulling the battery out.
Remove the first battery by pressing down on the positive end and pulling the battery out.
Remove the second battery by pushing up on the positive end and pulling the battery out.
Step 3
- Using a tri-point Y1 Screwdriver, remove the two center 7mm screws by turning them counterclockwise.
- Repeat with the two bottom screws.
Using a tri-point Y1 Screwdriver, remove the two center 7mm screws by turning them counterclockwise.
Repeat with the two bottom screws.
Step 4
- With the flat end of a spudger, gently apply pressure to the tabs located on left side of the controller.
- These tabs are breakable. However, if the tabs are broken the controller will still function.
- Open the front plate like a book.
- Small parts may fall out as you open the front plate.
With the flat end of a spudger, gently apply pressure to the tabs located on left side of the controller.
These tabs are breakable. However, if the tabs are broken the controller will still function.
Open the front plate like a book.
Small parts may fall out as you open the front plate.
Step 5
Speaker
- Place the plastic opening tool between the edge of the speaker and the wii remote.
- Gently lift the speaker out of the body of the Wii remote.
Place the plastic opening tool between the edge of the speaker and the wii remote.
Gently lift the speaker out of the body of the Wii remote.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 7 other contributors
Emily
Member since: 04/14/2013
1,116 Reputation
6 Guides authored
Badges:
13
+10 more badges
Team
Cal Poly, Team 3-44, Amido Spring 2013
Member of Cal Poly, Team 3-44, Amido Spring 2013
CPSU-AMIDO-S13S3G44
4 Members
19 Guides authored
joon lew - Feb 2, 2015
Reply
Thank you, u help me to fix it.