Difficulty
Moderate
Steps
5
Time Required
15 minutes
Sections
2
- Upper Case
- 2 steps
- Power Board
- 3 steps
Flags
0
BackNintendo Wii mini
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Unscrew the Bottom
- Remove the two rubber feet at the back of the console to reveal the hidden screws.
- Remove the four 6mm Phillips #0 screws.
Remove the two rubber feet at the back of the console to reveal the hidden screws.
Remove the four 6mm Phillips #0 screws.
1024
Step 2
Remove the Cover
- Turn the Wii mini right-side up. Then run a plastic opening tool around the middle edge of the console to loosen the top piece.
- Gently lift the top piece of the console and set it aside.
Turn the Wii mini right-side up. Then run a plastic opening tool around the middle edge of the console to loosen the top piece.
Gently lift the top piece of the console and set it aside.
Step 3
Power Board
- Using your fingers, slide out the blue ribbon cable from the the top of the power board.
- Using a Phillips #0 Screwdriver, unscrew the two 4mm screws at the top and bottom of the power board.
Using your fingers, slide out the blue ribbon cable from the the top of the power board.
Using a Phillips #0 Screwdriver, unscrew the two 4mm screws at the top and bottom of the power board.
Step 4
- Using your fingers, gently pull the pin connector to disconnect the power board from the disc drive.
Using your fingers, gently pull the pin connector to disconnect the power board from the disc drive.
Step 5
- Lift the power board from the console and set it aside.
Lift the power board from the console and set it aside.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Kristin Anderson
Member since: 01/23/2015
879 Reputation
5 Guides authored
Badges:
12
+9 more badges
Team
UWT Liner: Group 5
Member of UWT Liner: Group 5
Community
3 Members
10 Guides authored