Difficulty
Easy
Steps
3
Time Required
10 - 30 minutes
Sections
2
- NES Housing Removal
- 1 step
- Cartridge cover
- 2 steps
Flags
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackNintendo Entertainment System
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Unfortunately, the cover does not come with the imprint “European Edition”, but everything works as usual.
What you need
Step 1
Removing housing
- Remove the six 13.50mm PH2 screws from the base plate.
- The screws are countersunk 40mm into the base plate.
- Now take off the upper part of the housing.
Remove the six 13.50mm PH2 screws from the base plate.
The screws are countersunk 40mm into the base plate.
Now take off the upper part of the housing.
1024
Step 2
Cartridge cover
- Take the top housing and turn it over.
- Remove the four 7,80mm flathead screws.
- Remove both metal clips.
- If the flap does not stay open properly, you can bend the clips with pliers.
Take the top housing and turn it over.
Remove the four 7,80mm flathead screws.
Remove both metal clips.
If the flap does not stay open properly, you can bend the clips with pliers.
Step 3
Cover Flap
- Pull the front black cap off upwards.
- Now lift the flap out at an angle.
- The new flap can now be inserted.
Pull the front black cap off upwards.
Now lift the flap out at an angle.
The new flap can now be inserted.
Work the steps in reverse order to reassemble your device.
Cancel: I did not complete this guide.
One other person completed this guide.
These translators are helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
TimedIn
Wiwok
Author
with 1 other contributor
TimedIn
Member since: 01/10/2020
816 Reputation
3 Guides authored
Badges:
23
+20 more badges