Difficulty
Moderate
Steps
9
Time Required
Suggest a time??
Sections
3
- Battery
- 2 steps
- Lower Case
- 5 steps
- Wi-Fi Board
- 2 steps
Flags
0
BackDSi XL
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Remove the two Phillips screws securing the battery cover to the back of the handheld console.
- Lift the battery cover off the back of the DSi XL.
Remove the two Phillips screws securing the battery cover to the back of the handheld console.
Lift the battery cover off the back of the DSi XL.
1024
Step 2
- Lift the battery from the DSi XL.
Lift the battery from the DSi XL.
Step 3
Lower Case
- Remove the four rubber screw covers on the lower case by prying them up with a push pin.
Remove the four rubber screw covers on the lower case by prying them up with a push pin.
Step 4
- Remove the following seven Phillips screws that secure the lower case to the rest of the DSi XL:
- Four silver 5.3 mm screws
- Two black 5.3 mm screws
- One black 2.5 mm screw
Remove the following seven Phillips screws that secure the lower case to the rest of the DSi XL:
Four silver 5.3 mm screws
Two black 5.3 mm screws
One black 2.5 mm screw
Step 5
- Turn the DSi XL over, and open the display.
- Insert a spudger between the upper and lower case at the bottom left corner of the DSi.
- Slide the spudger along the bottom edge of the upper case to release the latches securing the upper case to the lower case.
Turn the DSi XL over, and open the display.
Insert a spudger between the upper and lower case at the bottom left corner of the DSi.
Slide the spudger along the bottom edge of the upper case to release the latches securing the upper case to the lower case.
Step 6
- Close the display and turn the DSi XL over.
- Lift the lower case from the front edge.
- Rotate the lower case away from the DSi.
- The lower case cannot be completely removed yet, since it is still connected to the motherboard.
Close the display and turn the DSi XL over.
Lift the lower case from the front edge.
Rotate the lower case away from the DSi.
The lower case cannot be completely removed yet, since it is still connected to the motherboard.
Step 7
- Using a spudger, pry the SD card/right shoulder button connector off its socket.
- Pry the volume button/left shoulder button connector off its socket on the motherboard with a spudger.
Using a spudger, pry the SD card/right shoulder button connector off its socket.
Pry the volume button/left shoulder button connector off its socket on the motherboard with a spudger.
Step 8
Wi-Fi Board
- Lift the Wi-Fi board up off its socket on the motherboard.
- Do not attempt to completely remove the Wi-Fi board yet. It is attached to the motherboard by an antenna cable.
Lift the Wi-Fi board up off its socket on the motherboard.
Do not attempt to completely remove the Wi-Fi board yet. It is attached to the motherboard by an antenna cable.
Step 9
- Use a spudger to pry the Wi-Fi cable off its socket on the underside of the Wi-Fi board.
Use a spudger to pry the Wi-Fi cable off its socket on the underside of the Wi-Fi board.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
10 other people completed this guide.
Author
with 4 other contributors
Brett Hartt
Member since: 04/12/2010
125,280 Reputation
143 Guides authored
Badges:
52
+49 more badges
Team
iFixit
Member of iFixit
Community
141 Members
15,767 Guides authored