Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

2

  • Battery
  • 2 steps
  • Lower Case
  • 5 steps

Flags

0

  • BackDSi XL

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery               
  • Remove the two Phillips screws securing the battery cover to the back of the handheld console.
  • Lift the battery cover off the back of the DSi XL.

Remove the two Phillips screws securing the battery cover to the back of the handheld console.

Lift the battery cover off the back of the DSi XL.

1024

Step 2

  • Lift the battery from the DSi XL.

Lift the battery from the DSi XL.

Step 3

              Lower Case               
  • Remove the four rubber screw covers on the lower case by prying them up with a push pin.

Remove the four rubber screw covers on the lower case by prying them up with a push pin.

Step 4

  • Remove the following seven Phillips screws that secure the lower case to the rest of the DSi XL:
  • Four silver 5.3 mm screws
  • Two black 5.3 mm screws
  • One black 2.5 mm screw

Remove the following seven Phillips screws that secure the lower case to the rest of the DSi XL:

Four silver 5.3 mm screws

Two black 5.3 mm screws

One black 2.5 mm screw

Step 5

  • Turn the DSi XL over, and open the display.
  • Insert a spudger between the upper and lower case at the bottom left corner of the DSi.
  • Slide the spudger along the bottom edge of the upper case to release the latches securing the upper case to the lower case.

Turn the DSi XL over, and open the display.

Insert a spudger between the upper and lower case at the bottom left corner of the DSi.

Slide the spudger along the bottom edge of the upper case to release the latches securing the upper case to the lower case.

Step 6

  • Close the display and turn the DSi XL over.
  • Lift the lower case from the front edge.
  • Rotate the lower case away from the DSi.
  • The lower case cannot be completely removed yet, since it is still connected to the motherboard.

Close the display and turn the DSi XL over.

Lift the lower case from the front edge.

Rotate the lower case away from the DSi.

The lower case cannot be completely removed yet, since it is still connected to the motherboard.

Step 7

  • Using a spudger, pry the SD card/right shoulder button connector off its socket.
  • Pry the volume button/left shoulder button connector off its socket on the motherboard with a spudger.

Using a spudger, pry the SD card/right shoulder button connector off its socket.

Pry the volume button/left shoulder button connector off its socket on the motherboard with a spudger.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.                                             

Author

                                      with 5 other contributors 

                    David Hodson                     

Member since: 04/13/2010

147,700 Reputation

                                      127 Guides authored                  



                       Badges:
                       53







                                                        +50 more badges