Difficulty
Easy
Steps
3
Time Required
5 minutes
Sections
1
- Battery
- 3 steps
Flags
0
BackNew 3DS 2015
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Unscrew the two 3mm Phillips #0 head screws along the top edge of the device.
- The screws on the back panel strip easily. Go slowly and press down firmly.
- The screws on the back panel are held in by locking washers, so they won’t come out of the back panel.
Unscrew the two 3mm Phillips #0 head screws along the top edge of the device.
The screws on the back panel strip easily. Go slowly and press down firmly.
The screws on the back panel are held in by locking washers, so they won’t come out of the back panel.
1024
Step 2
- Pull the top corner tabs of the front face plate outward and towards you.
- Pull the faceplate up and out of the slots at the bottom of the device.
- Set aside the back faceplate.
Pull the top corner tabs of the front face plate outward and towards you.
Pull the faceplate up and out of the slots at the bottom of the device.
Set aside the back faceplate.
Step 3
- Insert a plastic opening tool into the notch at the top of the battery.
- Pry the battery up with the plastic opening tool.
Insert a plastic opening tool into the notch at the top of the battery.
Pry the battery up with the plastic opening tool.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 3 other contributors
Tyler Starr
Member since: 10/06/2016
1,293 Reputation
7 Guides authored
Badges:
18
+15 more badges
Team
Cal Poly, Team 4-6, Livingston Fall 2016
Member of Cal Poly, Team 4-6, Livingston Fall 2016
CPSU-LIVINGSTON-F16S4G6
4 Members
35 Guides authored
David Clarke - Jan 9, 2020
Reply
The link to the Nintendo store to buy a battery no longer functions.