Nintendo 2Ds Rear Panel Replacement Repair Guide

Difficulty

Moderate

Steps

3

Time Required

Suggest a time??

Sections

1

• Rear Panel
• 3 steps

Flags

0

• BackNintendo 2DS

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Rear Panel               

• Remove the ten Phillips screws attaching the rear panel.

Remove the ten Phillips screws attaching the rear panel.

1024

Step 2

• The rear panel is attached to the motherboard by a ribbon cable, so be careful not to lift the rear panel too far from the device.
• Carefully pull the rear panel straight up from the device.

The rear panel is attached to the motherboard by a ribbon cable, so be careful not to lift the rear panel too far from the device.

Carefully pull the rear panel straight up from the device.

Step 3

• Carefully flip the back panel over to locate the attached ribbon cable.
• Remove the two Phillips screws attaching the ribbon cable to the rear panel.
• Take the opportunity to remove the Left and Right triggers, they have hinges that may break and springs that may jump away.

Carefully flip the back panel over to locate the attached ribbon cable.

Remove the two Phillips screws attaching the ribbon cable to the rear panel.

Take the opportunity to remove the Left and Right triggers, they have hinges that may break and springs that may jump away.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      9 other people completed this guide.                                             

Author

                                      with 7 other contributors 

                    Fina Beauchamp                     

Member since: 01/12/2015

2,816 Reputation

                                      6 Guides authored                  



                       Badges:
                       19







                                                        +16 more badges                           

Team

                       Cal Poly, Team 70-1, Forte Winter 2015                        

                                                  Member of Cal Poly, Team 70-1, Forte Winter 2015 



                    CPSU-FORTE-W15S70G1                     


                                            4 Members                     


                                            31 Guides authored                     

Evergreen - Apr 13, 2020

Reply

The two top screws on the backpanel I cannot get out, I used the same screwdriver I used for every other screw.

Please help!

Leo Ochoa - Dec 22, 2020

For those two screws that are on the top cap aren’t supposed to come out, if the do come out it means you’ve broken those screws. Also after unscrewing that top it should just slide up.