Ninja Professional Blender Bl660 Suction Cups On Base Replacement Repair Guide

Difficulty

Easy

Steps

4

Time Required

                          5 - 10 minutes            

Sections

1

• Suction Cups on Base
• 4 steps

Flags

0

• BackNinja Professional Blender BL660

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Suction Cups on Base               

• Using the Phillips #1 screwdriver, remove the 5 screws holding the outer base.
• Lift the base up to remove it.

Using the Phillips #1 screwdriver, remove the 5 screws holding the outer base.

Lift the base up to remove it.

1024

Step 2

• Turn the base panel upside down to reveal the suction cup feet.

Turn the base panel upside down to reveal the suction cup feet.

Step 3

• Push the stopper on the suction cup foot through the bottom panel using the iFixit plastic opening tool.

Push the stopper on the suction cup foot through the bottom panel using the iFixit plastic opening tool.

Step 4

• Once stopper has passed through the bottom panel, pull suction cup foot out.
• Replace suction cup feet as needed.
• Ninja does not sell suction cup feet. You will need to obtain them from other third party vendors.

Once stopper has passed through the bottom panel, pull suction cup foot out.

Replace suction cup feet as needed.

Ninja does not sell suction cup feet. You will need to obtain them from other third party vendors.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Hernan Mendoza                     

Member since: 09/22/2017

201 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Central Washington University, Team S1-G1, Pengilly Fall 2017                        

                                                  Member of Central Washington University, Team S1-G1, Pengilly Fall 2017 



                    CWU-PENGILLY-F17S1G1                     


                                            4 Members                     


                                            7 Guides authored                     

camoramirez - Sep 15, 2020

Reply

Where did you get the suction cups from?