Ninja Kitchen System Pulse Motor Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          4 - 8 minutes            

Sections

2

• Base Disassembly
• 2 steps
• Motor
• 2 steps

Flags

0

• BackNinja Kitchen System Pulse

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Base Disassembly               

• Take out the three 15 mm Phillips #1 screws.
• Remove the 15mm T10 screw.
• Place the 4 screws on the magnetic mat.

Take out the three 15 mm Phillips #1 screws.

Remove the 15mm T10 screw.

Place the 4 screws on the magnetic mat.

1024

Step 2

• Remove the gray base by lifting upwards and placing to the side.

Remove the gray base by lifting upwards and placing to the side.

Step 3

              Motor               

• Remove the three 15 mm Phillips #1 screws.
• Place screws on magnetic mat.

Remove the three 15 mm Phillips #1 screws.

Place screws on magnetic mat.

Step 4

• Remove the motor by gently lifting up. Be careful with the cords, as they may be tangled.
• This is the entire motor for the Ninja. If you have access to a spare motor, simply swap out the motors.

Remove the motor by gently lifting up. Be careful with the cords, as they may be tangled.

This is the entire motor for the Ninja. If you have access to a spare motor, simply swap out the motors.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    DJ                     

Member since: 01/20/2016

122 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       USF Tampa, Team 15-1, Remmell Spring 2016                        

                                                  Member of USF Tampa, Team 15-1, Remmell Spring 2016 



                    USFT-REMMELL-S16S15G1                     


                                            3 Members                     


                                            5 Guides authored                     

Noman - Nov 23, 2017

Reply

Dear sir my ninga kitchen system 1100 (blender machine) motor rod is broken i need help to replace it where i can get the rod or repair shop near me thank you