Ninja Coffee Bar Single Serve System Frother Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          5 - 10 minutes            

Sections

1

• Frother
• 4 steps

Flags

0

• BackNinja Coffee Bar Single-Serve System CF111 30

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Frother               

• Remove four 6mm #1 Phillips head screws from under the basket area.
• Remove the single 6mm #1 Phillips head screw from the side of the unit.

Remove four 6mm #1 Phillips head screws from under the basket area.

Remove the single 6mm #1 Phillips head screw from the side of the unit.

1024

Step 2

• Gently pry the upper cover off the unit above the brew basket and above the water reservoir base and along the side of the upper cover.

Gently pry the upper cover off the unit above the brew basket and above the water reservoir base and along the side of the upper cover.

Step 3

• Remove the single 6mm #1 Phillips head screw from the top of the unit. (The two smaller screws should remain attached.)
• Using an extension, remove the two 6mm Phillips head screws from the side of the frother motor pivot.

Remove the single 6mm #1 Phillips head screw from the top of the unit. (The two smaller screws should remain attached.)

Using an extension, remove the two 6mm Phillips head screws from the side of the frother motor pivot.

Step 4

• Pinch power connector and pull lighly to separate.
• Pull motor straight up to separate from unit.

Pinch power connector and pull lighly to separate.

Pull motor straight up to separate from unit.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    CJ Berg                     

Member since: 11/05/2018

444 Reputation

                                      4 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       UMass Dartmouth, Team S5-G4, Gulbrandsen Fall 2018                        

                                                  Member of UMass Dartmouth, Team S5-G4, Gulbrandsen Fall 2018 



                    UMASSD-GULBRANDSEN-F18S5G4                     


                                            3 Members                     


                                            5 Guides authored                     

clarkwolfe - Jun 24, 2020

Reply

Awesome write-up. But does anyone know where a replacement frother arm can be purchased?