Difficulty

Moderate

Steps

5

Time Required

                          20 minutes

Sections

1

  • Drip Stop Toggle and Brew Basket
  • 5 steps

Flags

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackNinja Coffee Bar Single-Serve System CF111 30

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Drip Stop Toggle and Brew Basket
  • Slide brew baskets to open position

Slide brew baskets to open position

1024

Step 2

  • Unscrew three 6mm screws with Phillips head screw driver (need a thinner screwdriver than the one in the ifixit tool kit)

Unscrew three 6mm screws with Phillips head screw driver (need a thinner screwdriver than the one in the ifixit tool kit)

Step 3

  • Using needle nose tweezers, push the bottom of the pin up from behind the brew basket
  • Using needle nose tweezers, pull out the pin

Using needle nose tweezers, push the bottom of the pin up from behind the brew basket

Using needle nose tweezers, pull out the pin

Step 4

  • Remove brew basket from swinging basket holder

Remove brew basket from swinging basket holder

Step 5

  • Unscrew one 6mm screw from drip stop toggle
  • Remove drip stop toggle

Unscrew one 6mm screw from drip stop toggle

Remove drip stop toggle

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Naser Aldousari

Member since: 10/10/2017

310 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       USF Tampa, Team S13-G69, Cagle Fall 2017                        

                                                  Member of USF Tampa, Team S13-G69, Cagle Fall 2017 



                    USFT-CAGLE-F17S13G69                     


                                            4 Members                     


                                            3 Guides authored

Dani - Oct 10, 2018

Reply

Can you provide more detail regarding the small spring that you provide the warning for? The one that needs to stay in place. If it does fall out, how can not be fixed or rather where does not go?

Marcus Martinez - Mar 27, 2022

Reply

Agree! The spring NEEDS to be resting vertically in between the two clips, in my case, these have worn and the spring came out of seat. It needed to be refastened and the five beeps, “of death” have disappeared and my coffeepot functions again!

Marcus Martinez - Mar 27, 2022

  • this works on the ninja coffee bar larger system as well