Difficulty
Easy
Steps
6
Time Required
20 - 30 minutes
Sections
2
- Top Flash Casing
- 3 steps
- Flash Hinge Spring
- 3 steps
Flags
0
BackNikon D90
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Open the Flash
- Use a plastic opening tool to lift up the flash.
Use a plastic opening tool to lift up the flash.
1024
Step 2
Flash Casing Screws
- Using a PH00 screwdriver, remove the two 5.3 mm Phillips screws from the flash casing.
- Be careful not to strip the screw heads.
Using a PH00 screwdriver, remove the two 5.3 mm Phillips screws from the flash casing.
Be careful not to strip the screw heads.
Step 3
Removing the Top Flash Casing
- Use a plastic opening tool and carefully pry open the top casing of the flash.
- Then, lift off the top casing of the flash.
Use a plastic opening tool and carefully pry open the top casing of the flash.
Then, lift off the top casing of the flash.
Step 4
Loosening the Spring Screw
- Using a PH00 screwdriver, loosen the 3.3 mm Phillips screw from the spring.
Using a PH00 screwdriver, loosen the 3.3 mm Phillips screw from the spring.
Step 5
Releasing the Spring
- Use a plastic opening tool and carefully pry up the spring arm.
- Doing this with release the pressure of the spring.
Use a plastic opening tool and carefully pry up the spring arm.
Doing this with release the pressure of the spring.
Step 6
Removing the Spring
- Finish removing the screw holding the spring in place.
- The spring can now be removed and replaced.
Finish removing the screw holding the spring in place.
The spring can now be removed and replaced.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Matthew Grota
Member since: 10/16/2014
586 Reputation
3 Guides authored
Badges:
11
+8 more badges
Team
UMass Dartmouth, Team 1-7, Duarte Fall 2014
Member of UMass Dartmouth, Team 1-7, Duarte Fall 2014
UMASSD-DUARTE-F14S1G7
3 Members
6 Guides authored
Ryad Arlan - Aug 3, 2016
Reply
These are great tutorials,
I was looking for one on how to fix the pop up flash not locking down,
It was bought second hand and dropped on the logo,
The front panel needed to be replaced,
Now for the Flash that is constantly up.
Any links? jjryzler@gmail.com
