Difficulty
Very easy
Steps
3
Time Required
5 - 10 minutes
Sections
1
- Bottom Casing
- 3 steps
Flags
0
BackNikon D90
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Bottom Casing
- Turn the camera so the bottom casing is facing up.
Turn the camera so the bottom casing is facing up.
1024
Step 2
Removing Screws from the Bottom Casing
- Next, use a PH00 screwdriver to remove the screws from the bottom casing.
- Remove the four 5.3 mm Phillips screws.
- Remove the three other 6.3 mm Phillips screws.
- Be careful not to strip the screws.
Next, use a PH00 screwdriver to remove the screws from the bottom casing.
Remove the four 5.3 mm Phillips screws.
Remove the three other 6.3 mm Phillips screws.
Be careful not to strip the screws.
Step 3
Removing the Bottom Case
- Next, use a plastic opening tool and carefully pop off the bottom case.
- Then, lift and remove the bottom case.
Next, use a plastic opening tool and carefully pop off the bottom case.
Then, lift and remove the bottom case.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 3 other contributors
Matthew Grota
Member since: 10/16/2014
586 Reputation
3 Guides authored
Badges:
11
+8 more badges
Team
UMass Dartmouth, Team 1-7, Duarte Fall 2014
Member of UMass Dartmouth, Team 1-7, Duarte Fall 2014
UMASSD-DUARTE-F14S1G7
3 Members
6 Guides authored
