Nikon D80 Rear Lcd Screen Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          20 minutes

Sections

Rear LCD Screen
5 steps

Flags

BackNikon D80
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Rear LCD Screen

Using a Philips #00 screwdriver, remove the four 6.2mm from the left and right sides of the outer cover.

Using a Philips #00 screwdriver, remove the four 6.2mm from the left and right sides of the outer cover.

1024

Step 2

Use tweezers to gently flip the small locking flap of the zero force insertion connector up.
Pull the orange connector cable away from the main body of the camera using the tweezers.
Remove the back cover.

Use tweezers to gently flip the small locking flap of the zero force insertion connector up.

Pull the orange connector cable away from the main body of the camera using the tweezers.

Remove the back cover.

Step 3

Using a Philips #00 screwdriver, remove the three 4.3 mm screws by rotating screwdriver to the left.
Use the Phillips #00 screwdriver to remove the two 3.4 mm screws.

Using a Philips #00 screwdriver, remove the three 4.3 mm screws by rotating screwdriver to the left.

Use the Phillips #00 screwdriver to remove the two 3.4 mm screws.

Step 4

Using blunt tweezers, gently flip the small locking flap of the zero force insertion connector up for both connectors.
Use blunt tweezers to pull the left ribbon connector out of the zero insertion force connector.
Using the same tweezers, pull the right ribbon connector out of the zero insertion force connector.

Using blunt tweezers, gently flip the small locking flap of the zero force insertion connector up for both connectors.

Use blunt tweezers to pull the left ribbon connector out of the zero insertion force connector.

Using the same tweezers, pull the right ribbon connector out of the zero insertion force connector.

Step 5

Slide out the LCD screen by pulling towards the right.
Remove the LCD screen.
The buttons beside the screen fall out easily. Remember where they were and put them back when finished with the screen.

Slide out the LCD screen by pulling towards the right.

Remove the LCD screen.

The buttons beside the screen fall out easily. Remember where they were and put them back when finished with the screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Sara Martin

Member since: 10/09/2017

512 Reputation

                                      4 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       USF Tampa, Team S1-G1, Leahy Fall 2017                        

                                                  Member of USF Tampa, Team S1-G1, Leahy Fall 2017 



                    USFT-LEAHY-F17S1G1                     


                                            4 Members                     


                                            5 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team