Difficulty
Difficult
Steps
5
Time Required
35 minutes
Sections
1
- Flash Assembly
- 5 steps
Flags
0
BackNikon D80
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Please note that this guide requires soldering. For more information on how to solder and desolder connections, please visit this guide.
What you need
Step 1
Flash Assembly
- Press the highlighted button to pop the flash up.
- Otherwise, use a plastic opening tool to gently lever open the flash by inserting the tool into the gap between the flash and the camera.
Press the highlighted button to pop the flash up.
Otherwise, use a plastic opening tool to gently lever open the flash by inserting the tool into the gap between the flash and the camera.
1024
Step 2
- Use the #00 Phillips-head screwdriver to remove both 4.20 mm screws by rotating the screwdriver to the left.
Use the #00 Phillips-head screwdriver to remove both 4.20 mm screws by rotating the screwdriver to the left.
Step 3
- Using a plastic opening tool, pry open the cover.
- Be advised, some plastic struts may snap off when you remove the cover.
Using a plastic opening tool, pry open the cover.
Be advised, some plastic struts may snap off when you remove the cover.
Step 4
- Using a soldering iron, desolder the orange, tan, and gray wires from the flash assembly.
- For more information on how to solder and desolder connections, please visit this guide.
- Use caution while using the hot soldering iron.
Using a soldering iron, desolder the orange, tan, and gray wires from the flash assembly.
For more information on how to solder and desolder connections, please visit this guide.
Use caution while using the hot soldering iron.
Step 5
- Gently remove the flash assembly from the casing.
- The surface may still be hot, so grab it with caution.
Gently remove the flash assembly from the casing.
The surface may still be hot, so grab it with caution.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Kevin Horwedel
Member since: 10/09/2017
175 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
USF Tampa, Team S1-G1, Leahy Fall 2017
Member of USF Tampa, Team S1-G1, Leahy Fall 2017
USFT-LEAHY-F17S1G1
4 Members
5 Guides authored