Difficulty
Very difficult
Steps
6
Time Required
1 hour
Sections
1
- Shutter last step
- 6 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackNikon D7000
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Shutter
- If the shutter looks like that, nothing works.
If the shutter looks like that, nothing works.
1024
Step 2
- Remove 2 screws.
Remove 2 screws.
Step 3
- Pull off the flex cable and remove the 3rd screw underneath.
Pull off the flex cable and remove the 3rd screw underneath.
Step 4
- Desolder 4 solder bridges
Desolder 4 solder bridges
Step 5
- Unsolder the motor cable
Unsolder the motor cable
Step 6
- Turn the gears to open the curtain.
- The lever is then right.
- When assembling, press the shutter lever down.
Turn the gears to open the curtain.
The lever is then right.
When assembling, press the shutter lever down.
Repeat the steps in order to reassemble your device.
Cancel: I did not complete this guide.
These translators are helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
Israel
irlanda
Author
with 1 other contributor
Charly
Member since: 10/24/2017
133 Reputation
1 Guide authored
Badges:
2
farman G - Mar 27, 2020
Reply
Does not work shutter with this steps, gives shutter error.
does not work with this last step. gives shutter error. while shutter been taking of from assembly unit, it seems no way to get back it work with new shutter unit.
