Difficulty
Very difficult
Steps
6
Time Required
15 - 20 minutes
Sections
1
- LCD
- 6 steps
Flags
0
BackNikon D5100
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
LCD
- Use a Phillips #000 screwdriver to remove the four screws around the perimeter of the LCD panel.
Use a Phillips #000 screwdriver to remove the four screws around the perimeter of the LCD panel.
1024
Step 2
- Using a fingernail or the flat edge of a spudger inserted into the seam, separate the LCD bevel from the main panel body.
Using a fingernail or the flat edge of a spudger inserted into the seam, separate the LCD bevel from the main panel body.
Step 3
- Use a spudger to remove the ribbon cables on the LCD’s circuit board by flipping up their plastic lock-bars and removing gently pulling them out of their ports.
Use a spudger to remove the ribbon cables on the LCD’s circuit board by flipping up their plastic lock-bars and removing gently pulling them out of their ports.
Step 4
- Use a spudger to disconnect the 16-pin cable by gently pulling it upward, away from the circuit board, until it is removed from its port.
Use a spudger to disconnect the 16-pin cable by gently pulling it upward, away from the circuit board, until it is removed from its port.
Step 5
- Desolder the 3 wires (red, yellow, and black) connecting the LCD board to the main camera body.
- Soldering/desoldering presents potential for device damage and burns. Take all necessary precautions, and always solder/desolder in a well-ventilated workspace.
Desolder the 3 wires (red, yellow, and black) connecting the LCD board to the main camera body.
Soldering/desoldering presents potential for device damage and burns. Take all necessary precautions, and always solder/desolder in a well-ventilated workspace.
Step 6
- The LCD assembly can now be fully separated from the main camera body.
- Remove the plastic bezel and metal bracket from the LCD itself to complete the removal process.
The LCD assembly can now be fully separated from the main camera body.
Remove the plastic bezel and metal bracket from the LCD itself to complete the removal process.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
8 other people completed this guide.
Author
with 6 other contributors
Liz
Member since: 04/25/2014
1,296 Reputation
5 Guides authored
Badges:
10
+7 more badges
Team
Cal Poly, Team 10-54, Amido Spring 2014
Member of Cal Poly, Team 10-54, Amido Spring 2014
CPSU-AMIDO-S14S10G54
4 Members
5 Guides authored
Ilia - Apr 10, 2016
Reply
Thank you so much! My camera was dropped . And yelow and black wires came off. Now i will try to fix it.
What is the functions of these wires?
Felipe Castro - Oct 5, 2016
Reply
Thanks for this Liz.
Removing the broken LCD from my Nikon D5100 seems like something I can do now!
I am unsure ?how to do the soldering bit to attach the new LCD, ?where to attach the wires…
Any help is welcome
Arline Osuna - Jul 22, 2017
Reply
I was able to fix it, thanks to you guys. But the colors that came on the, LCD are weird. At least I can see the image.
Franky - Mar 14, 2021
It’s very possible that applying the soldering iron to the board, while still attached to the back, caused the LCD to lose its color alignment and darken the display. I made the same mistake.
Lyle Ralston - Oct 22, 2017
Reply
I am having trouble reconnecting the 16-pin cable to the circuit board. Do you have any tips?