Difficulty
Easy
Steps
5
Time Required
5 - 10 minutes
Sections
1
- Battery Door
- 5 steps
Flags
0
BackNikon D5100
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery Door
- Insert the battery into the battery compartment at the bottom of the camera.
Insert the battery into the battery compartment at the bottom of the camera.
1024
Step 2
- Take the mending plate and place it over the threaded hole at the bottom of the camera.
- Make sure the mending plate is covering the battery compartment.
- Hold the mending plate in position.
Take the mending plate and place it over the threaded hole at the bottom of the camera.
Make sure the mending plate is covering the battery compartment.
Hold the mending plate in position.
Step 3
- While holding down the mending plate, take the screw and place it on top of the mending plate and over the threaded hole.
- Push the screw into the threaded hole and turn clockwise to screw in.
- Tighten the screw by using a screwdriver.
While holding down the mending plate, take the screw and place it on top of the mending plate and over the threaded hole.
Push the screw into the threaded hole and turn clockwise to screw in.
Tighten the screw by using a screwdriver.
Step 4
- The metal bar should be attached and tightly secured.
The metal bar should be attached and tightly secured.
Step 5
- Turn on the camera to check that the battery is properly secure.
Turn on the camera to check that the battery is properly secure.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Michelle Tran
Member since: 02/24/2015
101 Reputation
1 Guide authored
Badges:
2
Team
Cal Poly, Team 23-1, Green Winter 2015
Member of Cal Poly, Team 23-1, Green Winter 2015
CPSU-GREEN-W15S23G1
4 Members
4 Guides authored
Chiaki - Aug 21, 2019
Reply
My son broke the battery door and I kept it somewhere now it’s gone