Difficulty
Easy
Steps
3
Time Required
15 minutes
Sections
1
- Flash Spring
- 3 steps
Flags
0
BackNikon D3000
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Flash Spring
- Remove the two 2.5mm x 4mm Philips screws located directly under the flash.
- Pop off the covering of the flash to reveal the flash arm spring.
Remove the two 2.5mm x 4mm Philips screws located directly under the flash.
Pop off the covering of the flash to reveal the flash arm spring.
1024
Step 2
- Lift the flash arm spring using the plastic spudger and unhinge the spring to remove it.
Lift the flash arm spring using the plastic spudger and unhinge the spring to remove it.
Step 3
- Remove the spring by sliding it off, then replace it with a new one.
Remove the spring by sliding it off, then replace it with a new one.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
6 other people completed this guide.
Author
with 4 other contributors
Zahra Simpson
Member since: 08/26/2015
277 Reputation
1 Guide authored
Badges:
7
+4 more badges
Team
WeFiXiTT
Member of WeFiXiTT
Community
1 Member
1 Guide authored
