Difficulty

Moderate

Steps

6

Time Required

                          10 minutes

Sections

2

  • Menu Wheel and OK Button
  • 4 steps
  • LCD Screen
  • 2 steps

Flags

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackNikon Coolpix S9050

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Menu Wheel and OK Button
  • Remove the screws. There are two on each side, and four on the bottom. The black screws are 3.2 mm Phillips #000. The silver screws are also 3.2 mm Phillips #000.

Remove the screws. There are two on each side, and four on the bottom. The black screws are 3.2 mm Phillips #000. The silver screws are also 3.2 mm Phillips #000.

1024

Step 2

  • Remove the screen housing and trim piece.

Remove the screen housing and trim piece.

Step 3

  • Press down and pull the Menu Wheel/OK Button panel towards the screen. This will release the panel from the slots.

Press down and pull the Menu Wheel/OK Button panel towards the screen. This will release the panel from the slots.

Step 4

  • Lift up on the black plastic tab(zero insertion force connector-ZIF) and gently pull the panel out to detach the ribbon cable from the camera body.

Lift up on the black plastic tab(zero insertion force connector-ZIF) and gently pull the panel out to detach the ribbon cable from the camera body.

Step 5

              LCD Screen
  • Remove the silver 3.2 mm Phillips #000 screw on the corner of the device to remove the screen.

Remove the silver 3.2 mm Phillips #000 screw on the corner of the device to remove the screen.

Step 6

  • Gently remove pin connector using the spudger to disconnect the screen.

Gently remove pin connector using the spudger to disconnect the screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Kyle Gildner

Member since: 11/05/2019

193 Reputation

                                      2 Guides authored                  



                       Badges:
                       2

Team

                       IUPUI, Team S1-G5, Stella Fall 2019                        

                                                  Member of IUPUI, Team S1-G5, Stella Fall 2019 



                    IUPUI-STELLA-F19S1G5                     


                                            3 Members                     


                                            5 Guides authored