Difficulty
Moderate
Steps
3
Time Required
10 minutes
Sections
1
- CCD Lens
- 3 steps
Flags
0
BackNikon Coolpix S8200
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
CCD Lens
- First you must unscrew the back case by removing the two screws found on the bottom left and right of the camera as shown in the image.
- Be careful not to remove any extra screws.
First you must unscrew the back case by removing the two screws found on the bottom left and right of the camera as shown in the image.
Be careful not to remove any extra screws.
1024
Step 2
- Once the back is removed, Do Not remove the ribbon cables shown in the within the red circles on the image.
Once the back is removed, Do Not remove the ribbon cables shown in the within the red circles on the image.
Step 3
- Unscrew the two screws around the silver disk-like part indicated by the red circles on the image and then remove them.
- Next gently remove the black strap indicated by the yellow circle on the image.
- The black strap can easily snap back on for reassembly.
Unscrew the two screws around the silver disk-like part indicated by the red circles on the image and then remove them.
Next gently remove the black strap indicated by the yellow circle on the image.
The black strap can easily snap back on for reassembly.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 6 other contributors
Nelson Antiposti
Member since: 03/25/2015
499 Reputation
3 Guides authored
Badges:
10
+7 more badges
Team
UMass Dartmouth, Team 5-3, Kish Spring 2015
Member of UMass Dartmouth, Team 5-3, Kish Spring 2015
UMASSD-KISH-S15S5G3
4 Members
8 Guides authored