Nikon Coolpix S800C Back Panel Touch Screen Replacement Guide Repair Guide

Difficulty

Easy

Steps

2

Time Required

                          2 - 5 minutes            

Sections

1

• Back Panel/Touch Screen
• 2 steps

Flags

0

• BackNikon Coolpix S800c

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Panel/Touch Screen               

• Remove all 4 screws from the bottom face of the camera using a Phillips #00 head screwdriver (found in iFixit tool kit).

Remove all 4 screws from the bottom face of the camera using a Phillips #00 head screwdriver (found in iFixit tool kit).

1024

Step 2

• Using a plastic tool, pry open the back panel of the camera. Be careful not to apply too much force and damage the camera.

Using a plastic tool, pry open the back panel of the camera. Be careful not to apply too much force and damage the camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Ilyasah Muhammad                     

Member since: 01/30/2018

234 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Baylor, Team S2-G6, Johnson Spring 2018                        

                                                  Member of Baylor, Team S2-G6, Johnson Spring 2018 



                    BU-JOHNSON-S18S2G6                     


                                            3 Members                     


                                            10 Guides authored                     

Brian Capouch - Mar 2, 2020

Reply

Many steps missing!! There are TWO more screws than the guide tells you about. Plus there’s no mention that after you finally get the camera split, you can’t just tug it apart—the motherboard is attached to the LCD. This guide is about worse than none at all!!