Nikon Coolpix S7000 Shutter Button Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 - 10 minutes

Sections

Shutter Button
4 steps

Flags

BackNikon Coolpix S7000
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Shutter Button

Remove the outer frame of the camera by unscrewing the screws around its sides with a JIS J000 screwdriver.
Screw locations.

Remove the outer frame of the camera by unscrewing the screws around its sides with a JIS J000 screwdriver.

Screw locations.

1024

Step 2

Remove outer camera frames by carefully pulling the frame apart from the body of the camera.

Remove outer camera frames by carefully pulling the frame apart from the body of the camera.

Step 3

Once the shutter button assembly is removed from the camera shell, carefully remove the black tape on the underside of the metal plate.
Black tape.
Do not discard the tape as you will reapply it when putting the shutter assembly back together.

Once the shutter button assembly is removed from the camera shell, carefully remove the black tape on the underside of the metal plate.

Black tape.

Do not discard the tape as you will reapply it when putting the shutter assembly back together.

Step 4

Unscrew the two screws on each side of the metal plate to remove the plate and springs underneath it.
Push the button through the assembly to release it and then carefully remove the button cover to reveal the coiled spring and bottom cover.
Locations of the two screws.
Be very careful not to lose the two metal plate springs and the coiled spring when disassembling. A slow and steady hand will help prevent the springs from ejecting.

Unscrew the two screws on each side of the metal plate to remove the plate and springs underneath it.

Push the button through the assembly to release it and then carefully remove the button cover to reveal the coiled spring and bottom cover.

Locations of the two screws.

Be very careful not to lose the two metal plate springs and the coiled spring when disassembling. A slow and steady hand will help prevent the springs from ejecting.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor

                    Nicholas Leon-Schetina

Member since: 02/24/2017

110 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       USF Tampa, Team S2-G3, Lacy Spring 2017                        

                                                  Member of USF Tampa, Team S2-G3, Lacy Spring 2017 



                    USFT-LACY-S17S2G3                     


                                            4 Members                     


                                            10 Guides authored

Beatrix - Jul 12, 2018

shutter keeps trying to open. clicks slighly and does not open

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team