Difficulty
Moderate
Steps
7
Time Required
1 minute
Sections
1
- LCD Screen
- 7 steps
Flags
0
BackNikon Coolpix S5200
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
LCD Screen
- There are four 0.1 mm screws holding the front and back of the camera together all along the outside of the camera
- There should be four screws
There are four 0.1 mm screws holding the front and back of the camera together all along the outside of the camera
There should be four screws
1024
Step 2
- Use the Phillips Head screw driver head to remove the four 0.1 mm screws surrounding the outer edges of the camera
Use the Phillips Head screw driver head to remove the four 0.1 mm screws surrounding the outer edges of the camera
Step 3
- Pull the plastic back cover off of and away from the LCD screen
Pull the plastic back cover off of and away from the LCD screen
Step 4
- Carefully remove the LCD screen from the silver plate that once held it in place by pulling it away from the internal components
Carefully remove the LCD screen from the silver plate that once held it in place by pulling it away from the internal components
Step 5
- Remove the six designated screws sized 0.1 mm from the metal plate using a Phillip’s Head screwdriver in size PH00.
Remove the six designated screws sized 0.1 mm from the metal plate using a Phillip’s Head screwdriver in size PH00.
Step 6
- Lift the metal plate away from the internal components of the camera
Lift the metal plate away from the internal components of the camera
Step 7
- Carefully remove the LCD screen by pulling it away from the camera. Repeat these steps in reverse order to install the new LCD screen.
Carefully remove the LCD screen by pulling it away from the camera. Repeat these steps in reverse order to install the new LCD screen.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Andy Powers
Member since: 09/22/2015
391 Reputation
3 Guides authored
Badges:
9
+6 more badges
Team
University of Alabama, Team 1-2, Sydow campbell Fall 2015
Member of University of Alabama, Team 1-2, Sydow campbell Fall 2015
UA-SYDOW CAMPBELL-F15S1G2
4 Members
6 Guides authored
joshronsen - May 27, 2017
Reply
Shouldn’t the replacement LCD screen be considered a part? It is in fact very difficult to replace it without having the part to replace.