Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

2

  • Back Cover
  • 5 steps
  • LCD Screen
  • 2 steps

Flags

1

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

  • BackNikon Coolpix S51c

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Back Cover               
  • Remove all five screws from the bottom of the camera using a Phillips #00 screwdriver.

Remove all five screws from the bottom of the camera using a Phillips #00 screwdriver.

1024

Step 2

  • Open the battery door by sliding it in the direction of the arrow to reveal a hidden screw on the opposite side of the orange lever.
  • Remove this screw using a Phillips #00 screwdriver.

Open the battery door by sliding it in the direction of the arrow to reveal a hidden screw on the opposite side of the orange lever.

Remove this screw using a Phillips #00 screwdriver.

Step 3

  • Rotate the camera to find the side panel with the lanyard attachment.
  • Detach the side panel by the lifting bottom corner slightly with the spudger.

Rotate the camera to find the side panel with the lanyard attachment.

Detach the side panel by the lifting bottom corner slightly with the spudger.

Step 4

  • Lift the back cover, being careful not to rip the orange cables between the camera and the back cover.

Lift the back cover, being careful not to rip the orange cables between the camera and the back cover.

Step 5

  • With the back cover lifted, lift the black flap that connects the ribbon to the motherboard with the spudger and carefully remove the back cover.

With the back cover lifted, lift the black flap that connects the ribbon to the motherboard with the spudger and carefully remove the back cover.

Step 6

              LCD Screen               
  • On back of LCD screen, locate the three screws underneath the ribbon and remove them.

On back of LCD screen, locate the three screws underneath the ribbon and remove them.

Step 7

  • Take out rectangular component on the side where the screws were.
  • Pry apart screen from back casing using the spudger.

Take out rectangular component on the side where the screws were.

Pry apart screen from back casing using the spudger.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 4 other contributors 

                    Ryan                     

Member since: 04/12/2011

146 Reputation

                                      6 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Cal Poly, Team 18-24, Garner Spring 2011                        

                                                  Member of Cal Poly, Team 18-24, Garner Spring 2011 



                    CPSU-GARNER-S11S18G24                     


                                            4 Members                     


                                            6 Guides authored