Difficulty

Easy

Steps

11

Time Required

                          7 minutes

Sections

1

  • External Casing
  • 11 steps

Flags

2

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Needs More Images

A few more images would make this guide’s procedures crystal clear.

  • BackNikon Coolpix S4100

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              External Casing
  • Using a Philips #000 head screwdriver, remove the 8 screws (3.30 mm) visible on the external part of the camera.
  • There are 2 on each side, and 4 on the bottom.

Using a Philips #000 head screwdriver, remove the 8 screws (3.30 mm) visible on the external part of the camera.

There are 2 on each side, and 4 on the bottom.

1024

Step 2

  • Remove the black casing on the back of the camera that runs around the LCD screen.

Remove the black casing on the back of the camera that runs around the LCD screen.

Step 3

  • Using the Philips #000 head screwdriver, remove the 1.90 mm internal screw located just above the lanyard mount.

Using the Philips #000 head screwdriver, remove the 1.90 mm internal screw located just above the lanyard mount.

Step 4

  • Pry off the front shell casing.
  • If you find this difficult, use a prying tool to help gently remove the casing.

Pry off the front shell casing.

If you find this difficult, use a prying tool to help gently remove the casing.

Step 5

  • Using the Philips #000 head screwdriver, remove the 3.30 mm screw located on the side of the camera near the lanyard mount.

Using the Philips #000 head screwdriver, remove the 3.30 mm screw located on the side of the camera near the lanyard mount.

Step 6

  • Using the Philips #000 head screwdriver, remove 2 additional 3.30 mm screws holding the lanyard mount in place.

Using the Philips #000 head screwdriver, remove 2 additional 3.30 mm screws holding the lanyard mount in place.

Step 7

  • Remove the lanyard mount and accompanying side shell casing off of the camera.

Remove the lanyard mount and accompanying side shell casing off of the camera.

Step 8

  • Using the Philips #000 head screwdriver, remove the 3.30 mm screw securing the top shell casing.

Using the Philips #000 head screwdriver, remove the 3.30 mm screw securing the top shell casing.

Step 9

  • Using the Philips #000 head screwdriver, remove the 3.40 mm screw located on the front of the camera in the upper corner by the LED light.

Using the Philips #000 head screwdriver, remove the 3.40 mm screw located on the front of the camera in the upper corner by the LED light.

Step 10

  • Remove the remaining side shell casing.

Remove the remaining side shell casing.

Step 11

  • Remove the top shell casing.

Remove the top shell casing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 6 other contributors 


                    Matthew Willis

Member since: 09/22/2015

574 Reputation

                                      4 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Baylor, Team 4-2, Williams Fall 2015                        

                                                  Member of Baylor, Team 4-2, Williams Fall 2015 



                    BU-WILLIAMS-F15S4G2                     


                                            4 Members                     


                                            8 Guides authored