Difficulty
Easy
Steps
5
Time Required
4 minutes
Sections
2
- Battery
- 2 steps
- Casing
- 3 steps
Flags
0
BackNikon Coolpix S4000
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
The screws used to hold the casing together are very small, and easy to lose. Keep them in a safe place where you will be able to find them again.
Be gentle when removing the front and back casing from the body of the camera. It is tight around the body and can crack easily if you try to force it apart. Use the spudger if working it apart with your fingers is proving difficult.
What you need
Step 1
Battery
- Slide the battery door open with a finger or thumb and release it so the door opens.
Slide the battery door open with a finger or thumb and release it so the door opens.
1024
Step 2
- Push the orange tab back and the battery will pop out.
Push the orange tab back and the battery will pop out.
Step 3
Casing
- Remove four 2mm Phillips #000 screws.
- Remove two black 3mm Phillips #000 screws.
- Remove one 4mm Phillips #000 screws.
- Remove two silver 3mm Phillips #000 screws.
Remove four 2mm Phillips #000 screws.
Remove two black 3mm Phillips #000 screws.
Remove one 4mm Phillips #000 screws.
Remove two silver 3mm Phillips #000 screws.
Step 4
- Use your fingers, or a spudger, to lift up one end of the casing and then pry the two pieces apart.
Use your fingers, or a spudger, to lift up one end of the casing and then pry the two pieces apart.
Step 5
- Turn the camera over.
- Use your fingers, or spudger, to lift one end of the back casing and pry it apart from back of the camera.
Turn the camera over.
Use your fingers, or spudger, to lift one end of the back casing and pry it apart from back of the camera.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Matina Newsom
Member since: 02/21/2018
755 Reputation
8 Guides authored
Badges:
7
+4 more badges
Team
University of North Texas, Team S4-G1, Thompson Spring 2018
Member of University of North Texas, Team S4-G1, Thompson Spring 2018
UNT-THOMPSON-S18S4G1
5 Members
16 Guides authored