Difficulty

Moderate

Steps

13

Time Required

                          10 minutes

Sections

3

  • Nikon Coolpix S3100 disassembly
  • 3 steps
  • LCD Screen
  • 4 steps
  • Lens
  • 6 steps

Flags

0

  • BackNikon Coolpix S3100 Camera

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Nikon Coolpix S3100 disassembly
  • Remove 8-2.46 mm screws from both sides and bottom of camera using a #000 Phillips screwdriver.
  • Remove 2 screws from left side. (picture 1)
  • Remove 4 screws from bottom. (picture 2)
  • Remove 2 screws from right side. (picture 3)

Remove 8-2.46 mm screws from both sides and bottom of camera using a #000 Phillips screwdriver.

Remove 2 screws from left side. (picture 1)

Remove 4 screws from bottom. (picture 2)

Remove 2 screws from right side. (picture 3)

1024

Step 2

  • Remove black cover pulling up with left thumb. Hold silver cover with right thumb.
  • Remove silver cover lifting up with left thumb. Hold the camera with right thumb.
  • Once internal circuit board is exposed, the red and blue wire terminals at top center can provide a nasty shock from the charged flash capacitor (silver can to left of terminals). BE CAREFUL!

Remove black cover pulling up with left thumb. Hold silver cover with right thumb.

Remove silver cover lifting up with left thumb. Hold the camera with right thumb.

Once internal circuit board is exposed, the red and blue wire terminals at top center can provide a nasty shock from the charged flash capacitor (silver can to left of terminals). BE CAREFUL!

Step 3

  • Remove 2-2.10mm screws in the front of the camera using a #000 Phillips screwdriver.
  • Remove the two screws.
  • Gently pull up to detach the frame. (picture 2)

Remove 2-2.10mm screws in the front of the camera using a #000 Phillips screwdriver.

Remove the two screws.

Gently pull up to detach the frame. (picture 2)

Step 4

              LCD Screen
  • Remove 2-2.10mm screws using a #000 Phillips screwdriver.

Remove 2-2.10mm screws using a #000 Phillips screwdriver.

Step 5

  • Gently pull the orange board to the right.

Gently pull the orange board to the right.

Step 6

  • Lift screen up holding both corners.

Lift screen up holding both corners.

Step 7

  • Gently pull to the left to release from ZIF connector.

Gently pull to the left to release from ZIF connector.

Step 8

              Lens
  • Remove 4-2.10mm screws using a #000 Phillips screwdriver.

Remove 4-2.10mm screws using a #000 Phillips screwdriver.

Step 9

  • Gently pull the shutter up.

Gently pull the shutter up.

Step 10

  • Remove 3-2.12mm screws using #000 Phillips screwdriver.

Remove 3-2.12mm screws using #000 Phillips screwdriver.

Step 11

  • Use a nylon or metal spudger to release the lens.

Use a nylon or metal spudger to release the lens.

Step 12

  • Repeat step 4 to the opposite side of the lens.

Repeat step 4 to the opposite side of the lens.

Step 13

  • The lens is now separated.

The lens is now separated.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      11 other people completed this guide.

Author

                                      with 2 other contributors 


                    Jorge

Member since: 03/11/2015

1,170 Reputation

                                      7 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       Colorado Springs, Team 2-4, Panko Spring 2015                        

                                                  Member of Colorado Springs, Team 2-4, Panko Spring 2015 



                    UCCS-PANKO-S15S2G4                     


                                            2 Members                     


                                            13 Guides authored

William Dawson - Jun 12, 2017

Reply

My lens shutter does not open correctly. After turning the camera on, the shutter only half opens with a juddering motion. Any ideas?

Anita

Nanji Buchiya - Apr 10, 2018

Reply

Nikon coolpix s3100 lens mocking place help my

Bimolthou Thuodam - Aug 12, 2020

Reply

My lens shutter does not open correctly after turning on and after close with juddering repeatly how can be repaired

shailendra - Jan 8, 2022

Reply

I have same issue it shutter half opens and doesnt open correctly