Difficulty

Moderate

Steps

10

Time Required

                          10 - 15 minutes

Sections

2

  • Batteries
  • 3 steps
  • LCD Screen
  • 7 steps

Flags

0

  • BackNikon Coolpix S30

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Batteries
  • Slide the battery cover to the right.
  • The hinge is on the left side of the cover which will allow the cover to stay attached.

Slide the battery cover to the right.

The hinge is on the left side of the cover which will allow the cover to stay attached.

1024

Step 2

  • Slide the second cover (yellow) to the right (similar to the outer cover). This will allow the batteries to be exposed.

Slide the second cover (yellow) to the right (similar to the outer cover). This will allow the batteries to be exposed.

Step 3

  • Remove the batteries by gently tipping the camera.

Remove the batteries by gently tipping the camera.

Step 4

              LCD Screen
  • FIRST: remove the batteries.
  • Unscrew the four screws around the corners of the camera. This can be done using the iFixit kit’s T5 (star tip screwdriver)

FIRST: remove the batteries.

Unscrew the four screws around the corners of the camera. This can be done using the iFixit kit’s T5 (star tip screwdriver)

Step 5

  • Unscrew the screw on the left (silver) first. It can be removed with the same tip (T5)
  • Change screwdriver tip to iFixit kit’s PH000. This removes the screw on the right (black) It is a small Phillips head.

Unscrew the screw on the left (silver) first. It can be removed with the same tip (T5)

Change screwdriver tip to iFixit kit’s PH000. This removes the screw on the right (black) It is a small Phillips head.

Step 6

  • Gently separate the back panel from the rest of the camera.

Gently separate the back panel from the rest of the camera.

Step 7

  • Remove screw connecting the top right of the screen to the mother board.

Remove screw connecting the top right of the screen to the mother board.

Step 8

  • Spin the camera around and gently pull the screen towards you. This will allow easy access to components on the motherboard.

Spin the camera around and gently pull the screen towards you. This will allow easy access to components on the motherboard.

Step 9

  • Remove connected strip by flipping up the small off-white plastic strip with tweezers.
  • Gently pull out the strip from the motherboard.

Remove connected strip by flipping up the small off-white plastic strip with tweezers.

Gently pull out the strip from the motherboard.

Step 10

  • Remove screw that is now in the top right corner. This will detach the screen entirely.

Remove screw that is now in the top right corner. This will detach the screen entirely.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Cassie Hamm

Member since: 01/21/2015

201 Reputation

                                      2 Guides authored                  



                       Badges:
                       2

Team

                       Penn State, Team 2-4, Kaschak Winter 2015                        

                                                  Member of Penn State, Team 2-4, Kaschak Winter 2015 



                    PSU-KASCHAK-W15S2G4                     


                                            4 Members                     


                                            5 Guides authored