Difficulty

Moderate

Steps

8

Time Required

Suggest a time??

Sections

1

  • Case
  • 8 steps

Flags

0

  • BackNikon COOLPIX P2

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Case
  • Remove the screw located near the speaker port using a Phillips 00 screwdriver.

Remove the screw located near the speaker port using a Phillips 00 screwdriver.

1024

Step 2

  • Turn camera upside down so that the battery compartment is facing you.
  • Remove all four screws from the bottom of the camera with a Phillips 00 screwdriver.

Turn camera upside down so that the battery compartment is facing you.

Remove all four screws from the bottom of the camera with a Phillips 00 screwdriver.

Step 3

  • Rotate the camera to the opposite side where the A/V outlet is located.
  • Unscrew and remove all four screws with a Phillips 00 screwdriver.

Rotate the camera to the opposite side where the A/V outlet is located.

Unscrew and remove all four screws with a Phillips 00 screwdriver.

Step 4

  • Turn the camera so that the Wi-Fi adapter is facing you.
  • Unscrew and remove all four screws with a Phillips 00 screwdriver.

Turn the camera so that the Wi-Fi adapter is facing you.

Step 5

  • Using a plastic opening tool, pry the front casing of the camera.
  • Continue this motion all around the front casing of the camera.
  • Gently pull apart the front casing from the rest of the camera.

Using a plastic opening tool, pry the front casing of the camera.

Continue this motion all around the front casing of the camera.

Gently pull apart the front casing from the rest of the camera.

Step 6

  • Using the plastic opening tool pry the back casing of the camera.

Using the plastic opening tool pry the back casing of the camera.

Step 7

  • Orange ribbon is fragile
  • Carefully pull apart the back casing of the camera from the front of the camera without tearing the orange ribbon.

Orange ribbon is fragile

Carefully pull apart the back casing of the camera from the front of the camera without tearing the orange ribbon.

Step 8

  • Pull down the on the black latch to carefully separate the orange ribbon from the motherboard.
  • Pull apart the orange ribbon and front casing from the rest of the camera.

Pull down the on the black latch to carefully separate the orange ribbon from the motherboard.

Pull apart the orange ribbon and front casing from the rest of the camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 11 other contributors 


                    Jessica Brough

Member since: 01/22/2012

135 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Cal Poly, Team 3-28, Amido Winter 2012                        

                                                  Member of Cal Poly, Team 3-28, Amido Winter 2012 



                    CPSU-AMIDO-W12S3G28                     


                                            4 Members                     


                                            10 Guides authored