Difficulty
Difficult
Steps
15
Time Required
15 - 30 minutes
Sections
2
- Nikon Coolpix P100 Motherboard Access
- 13 steps
- Viewfinder
- 2 steps
Flags
1
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
BackNikon Coolpix P100
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Nikon Coolpix P100 Motherboard Access
- Turn the front of the camera toward you.
Turn the front of the camera toward you.
1024
Step 2
- On the left side of the camera, use a Phillips #00 Precision Screwdriver to remove the two marked screws.
On the left side of the camera, use a Phillips #00 Precision Screwdriver to remove the two marked screws.
Step 3
- On the right side of the camera, remove the first visible screw above the HDMI and A/V OUT cover.
On the right side of the camera, remove the first visible screw above the HDMI and A/V OUT cover.
Step 4
- Lift the HDMI and A/V OUT cover to access the hidden screw between the two ports.
- Remove the screw
Lift the HDMI and A/V OUT cover to access the hidden screw between the two ports.
Remove the screw
Step 5
- Flip the camera upside down and remove the seven marked screws.
Flip the camera upside down and remove the seven marked screws.
Step 6
- Turn the back of the camera toward you.
- Lift the display panel and remove the two marked screws
Turn the back of the camera toward you.
Lift the display panel and remove the two marked screws
Step 7
- Use a plastic iFixit opening tool to gently loosen the top and sides of the camera.
Use a plastic iFixit opening tool to gently loosen the top and sides of the camera.
Step 8
- Before fully opening the camera, identify the two marked ribbon cables
- Properly detach the ribbons before proceeding
Before fully opening the camera, identify the two marked ribbon cables
Properly detach the ribbons before proceeding
Step 9
- Carefully open the camera.
- Now you have partial access to the camera’s motherboard.
Carefully open the camera.
Now you have partial access to the camera’s motherboard.
Step 10
- Remove the five indicated screws that are attached to the metal plate.
Remove the five indicated screws that are attached to the metal plate.
Step 11
- Remove the hidden top screw that is attached to the metal plate.
Remove the hidden top screw that is attached to the metal plate.
Step 12
- Use a plastic iFixit opening tool to carefully loosen the metal plate.
- Remove the metal plate to access the camera’s motherboard.
Use a plastic iFixit opening tool to carefully loosen the metal plate.
Remove the metal plate to access the camera’s motherboard.
Step 13
- Now you have access to the camera’s motherboard
Now you have access to the camera’s motherboard
Step 14
Viewfinder
- Remove the screw that is located on the left of the view finder.
Remove the screw that is located on the left of the view finder.
Step 15
- Carefully detach the two ribbon cables and detach the viewfinder.
Carefully detach the two ribbon cables and detach the viewfinder.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 1 other contributor
Nghiem Ngo
Member since: 01/15/2015
309 Reputation
2 Guides authored
Badges:
10
+7 more badges
Team
USF Tampa, Team 1-1, Tanski Winter 2015
Member of USF Tampa, Team 1-1, Tanski Winter 2015
USFT-TANSKI-W15S1G1
3 Members
8 Guides authored