Nikon Coolpix L840 Lanyard Ring Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          3 - 5 minutes            

Sections

2

• Motherboard
• 3 steps
• Lanyard Ring
• 2 steps

Flags

0

• BackNikon Coolpix L840

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Motherboard               

• Unscrew all eight black, 4mm screws with a Philips 000. (The top-most screw shown in the third image can be accessed by lifting the cover flap off.)

Unscrew all eight black, 4mm screws with a Philips 000. (The top-most screw shown in the third image can be accessed by lifting the cover flap off.)

1024

Step 2

• Pry case open with a metal spludger by slipping the spludger between the back and front case of the camera and wiggling the spludger forwards and backwards.
• Be careful not to damage the inner components of the camera when slipping the spludger into the camera.

Pry case open with a metal spludger by slipping the spludger between the back and front case of the camera and wiggling the spludger forwards and backwards.

Be careful not to damage the inner components of the camera when slipping the spludger into the camera.

Step 3

• Carefully unhook the silver strip with tweezers. Get a grasp of the sides of the silver strip with the tweezers, and pull upwards and out.
• The strip may also be identified by its blue tip, which becomes more visible once pulled out.

Carefully unhook the silver strip with tweezers. Get a grasp of the sides of the silver strip with the tweezers, and pull upwards and out.

The strip may also be identified by its blue tip, which becomes more visible once pulled out.

Step 4

              Lanyard Ring               

• Identify lanyard ring.
• Unscrew the 4 mm black screw with a Philips 000.

Identify lanyard ring.

Unscrew the 4 mm black screw with a Philips 000.

Step 5

• Insert a metal spludger (or another sturdy tool with a thin tip) into the hole of the lanyard ring and lift the ring upwards and out of the camera.

Insert a metal spludger (or another sturdy tool with a thin tip) into the hole of the lanyard ring and lift the ring upwards and out of the camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 4 other contributors 

                    Abraham Lozano                     

Member since: 04/11/2016

583 Reputation

                                      4 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       Cal Poly, Team 1-11, Maness Spring 2016                        

                                                  Member of Cal Poly, Team 1-11, Maness Spring 2016 



                    CPSU-MANESS-S16S1G11                     


                                            4 Members                     


                                            10 Guides authored