Difficulty
Moderate
Steps
6
Time Required
10 - 15 minutes
Sections
2
- Motherboard
- 3 steps
- Buttons
- 3 steps
Flags
0
BackNikon Coolpix L840
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Motherboard
- Unscrew all eight black, 4mm screws with a Philips 000. (The top-most screw shown in the third image can be accessed by lifting the cover flap off.)
Unscrew all eight black, 4mm screws with a Philips 000. (The top-most screw shown in the third image can be accessed by lifting the cover flap off.)
1024
Step 2
- Pry case open with a metal spludger by slipping the spludger between the back and front case of the camera and wiggling the spludger forwards and backwards.
- Be careful not to damage the inner components of the camera when slipping the spludger into the camera.
Pry case open with a metal spludger by slipping the spludger between the back and front case of the camera and wiggling the spludger forwards and backwards.
Be careful not to damage the inner components of the camera when slipping the spludger into the camera.
Step 3
- Carefully unhook the silver strip with tweezers. Get a grasp of the sides of the silver strip with the tweezers, and pull upwards and out.
- The strip may also be identified by its blue tip, which becomes more visible once pulled out.
Carefully unhook the silver strip with tweezers. Get a grasp of the sides of the silver strip with the tweezers, and pull upwards and out.
The strip may also be identified by its blue tip, which becomes more visible once pulled out.
Step 4
Buttons
- Unscrew the two, right-most, 2 mm screws with a Philips 000.
- Unscrew the left-most, 4 mm screw with a Philips 000.
Unscrew the two, right-most, 2 mm screws with a Philips 000.
Unscrew the left-most, 4 mm screw with a Philips 000.
Step 5
- Slide off the button panel in the marked direction.
Slide off the button panel in the marked direction.
Step 6
- Flip to the front side of the button panel to access the button sensors.
Flip to the front side of the button panel to access the button sensors.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Abraham Lozano
Member since: 04/11/2016
583 Reputation
4 Guides authored
Badges:
13
+10 more badges
Team
Cal Poly, Team 1-11, Maness Spring 2016
Member of Cal Poly, Team 1-11, Maness Spring 2016
CPSU-MANESS-S16S1G11
4 Members
10 Guides authored
rush - Sep 24, 2019
Reply
Where can I get a replacement board for the buttons?