Difficulty
Easy
Steps
6
Time Required
10 minutes
Sections
2
- Settings Buttons
- 3 steps
- LCD screen
- 3 steps
Flags
1
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackNikon Coolpix L820
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Settings Buttons
- Remove the battery before beginning.
- Use a Phillips #0 screwdriver to remove the screws on the front casing. There are ten screws, three on the left side, two on the bottom, and one on the right side of the camera.
Remove the battery before beginning.
Use a Phillips #0 screwdriver to remove the screws on the front casing. There are ten screws, three on the left side, two on the bottom, and one on the right side of the camera.
1024
Step 2
- Remove the front top Phillips screw with the screwdriver.
- Open the empty battery slot on the bottom of the camera, revealing four additional screws.
- Unscrew the four Phillips screws with the screwdriver.
Remove the front top Phillips screw with the screwdriver.
Open the empty battery slot on the bottom of the camera, revealing four additional screws.
Unscrew the four Phillips screws with the screwdriver.
Step 3
- Using the spudger, move around the casing, carefully separating the rear housing from the camera assembly.
- Be sure to only apply pressure to the casing panels and not the sensitive internal electronics.
- Once the rear housing is separated, the settings buttons will be accessible for replacement.
Using the spudger, move around the casing, carefully separating the rear housing from the camera assembly.
Be sure to only apply pressure to the casing panels and not the sensitive internal electronics.
Once the rear housing is separated, the settings buttons will be accessible for replacement.
Step 4
LCD screen
- Remove the front casing to expose the LCD screen and wires.
- Do not damage the exposed wires.
Remove the front casing to expose the LCD screen and wires.
Do not damage the exposed wires.
Step 5
- Using the tweezers, lift the hinges connecting the two ribbon wires to the camera.
Using the tweezers, lift the hinges connecting the two ribbon wires to the camera.
Step 6
- Once the flexible ribbon wires are disconnected, remove the LCD screen.
Once the flexible ribbon wires are disconnected, remove the LCD screen.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 5 other contributors
Lucas Otto
Member since: 03/23/2015
107 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
UMass Dartmouth, Team 1-4, Miles Spring 2015
Member of UMass Dartmouth, Team 1-4, Miles Spring 2015
UMASSD-MILES-S15S1G4
3 Members
10 Guides authored