Difficulty

Moderate

Steps

7

Time Required

                          15 - 20 minutes

Sections

1

  • LCD
  • 7 steps

Flags

0

  • BackNikon Coolpix L810

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              LCD
  • Remove two 5 mm Phillips #000 screws on the right hand side of the camera located near the power button.
  • Use of precision tweezers to help remove loosened screws is suggested.

Remove two 5 mm Phillips #000 screws on the right hand side of the camera located near the power button.

Use of precision tweezers to help remove loosened screws is suggested.

1024

Step 2

  • Remove two 5 mm Phillips #000 screws near the audio/video inputs on the opposite side near the flash component.

Remove two 5 mm Phillips #000 screws near the audio/video inputs on the opposite side near the flash component.

Step 3

  • Remove three 5 mm Phillips #000 screws on the bottom end of the camera.

Remove three 5 mm Phillips #000 screws on the bottom end of the camera.

Step 4

  • Carefully detach the back side of the camera by lifting both ends, with moderate force wobble until loosened enough to remove.

Carefully detach the back side of the camera by lifting both ends, with moderate force wobble until loosened enough to remove.

Step 5

  • With the LCD screen facing towards you, flip the screen to the right.

With the LCD screen facing towards you, flip the screen to the right.

Step 6

  • Remove three 5 mm Phillips #000 screws located on the bracket.
  • Hold the camera with the lens facing downward to prevent the bracket from falling off once all screws are removed.

Remove three 5 mm Phillips #000 screws located on the bracket.

Hold the camera with the lens facing downward to prevent the bracket from falling off once all screws are removed.

Step 7

  • Disconnect the ribbons that connect the LCD screen to the camera gently using precision tweezers or fingers.

Disconnect the ribbons that connect the LCD screen to the camera gently using precision tweezers or fingers.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 3 other contributors 


                    Emilio Mena

Member since: 01/14/2015

725 Reputation

                                      4 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       UW Tacoma, Team 3-1, Rose Winter 2015                        

                                                  Member of UW Tacoma, Team 3-1, Rose Winter 2015 



                    UWT-ROSE-W15S3G1                     


                                            4 Members                     


                                            8 Guides authored

Susan - Sep 17, 2016

Reply

I love ifixit instructions so much more than youtube. These are so easy and straightfoward and I love how screw sizes are carefully specified.

ramos.eng - May 5, 2020

Reply

Congratulations! Perfect lesson !

I need HELP presentation abowt desassembler / remove motherboard and other parts to repair the lenz move mechanism. Unfortunately NIKON left Brazil and the resident Suport tecnician besides not being good, stay in quarentine (corona virus)! Special Thanks for you help! Best regards