Nikon Coolpix L610 Power Shutter Button Assembly Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          30 - 45 minutes            

Sections

2

• Plastic Cover
• 4 steps
• Power/Shuttter Button Assembly
• 1 step

Flags

0

• BackNikon Coolpix L610

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Plastic Cover               

• Remove the four (3.20 mm) Phillips #00 screws at the bottom of the device.

Remove the four (3.20 mm) Phillips #00 screws at the bottom of the device.

1024

Step 2

• Remove the top (4.10 mm) Phillips #00 screw adjacent to the battery compartment.
• Remove the bottom (3.20 mm) Phillips #00 screw adjacent to the battery compartment.

Remove the top (4.10 mm) Phillips #00 screw adjacent to the battery compartment.

Remove the bottom (3.20 mm) Phillips #00 screw adjacent to the battery compartment.

Step 3

• Remove the top (4.20 mm) Phillips #00 screw adjacent to the mic side of the camera and opposite the battery side.
• Remove the lower (3.20 mm) Phillips #00 screw adjacent to the mic side of the camera and opposite of the battery side.

Remove the top (4.20 mm) Phillips #00 screw adjacent to the mic side of the camera and opposite the battery side.

Remove the lower (3.20 mm) Phillips #00 screw adjacent to the mic side of the camera and opposite of the battery side.

Step 4

• Separate the case using the plastic prying tool. This can be done by placing the tool in the position that is shown and in the position on the left side of the camera.

Separate the case using the plastic prying tool. This can be done by placing the tool in the position that is shown and in the position on the left side of the camera.

Step 5

              Power/Shuttter Button Assembly               

• Remove the panel containing the power and shutter button.

Remove the panel containing the power and shutter button.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Alex Miragliotta                     

Member since: 01/21/2015

158 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       USF Tampa, Team 9-4, Brown Winter 2015                        

                                                  Member of USF Tampa, Team 9-4, Brown Winter 2015 



                    USFT-BROWN-W15S9G4                     


                                            4 Members                     


                                            12 Guides authored