Difficulty
Moderate
Steps
2
Time Required
10 - 15 minutes
Sections
1
- Back Housing
- 2 steps
Flags
0
BackNikon Coolpix L330
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
This guide requires removing the back housing of the camera. When replacing the housing, use a PH000 screwdriver. The cover is well secured, so some force may be needed to remove the screws as well as the cover.
What you need
Step 1
Back Housing
- There are six screws attaching the back housing to the camera. Remove the screws from the body with a PH000 screw head.
- Two 1.5x2.5mm screws on the right side.
- Two 1.5x2.5mm screws on the underside.
- Two 1.5x2.5mm screw on the left side.
There are six screws attaching the back housing to the camera. Remove the screws from the body with a PH000 screw head.
Two 1.5x2.5mm screws on the right side.
Two 1.5x2.5mm screws on the underside.
Two 1.5x2.5mm screw on the left side.
1024
Step 2
- After removing the screws, use a metal spudger or plastic opening tool to push the back cover out.
- The metal spudger can damage the plastic housing, so use caution when applying any pressure to it. Use a plastic opening tool to reduce the risk of damage to the housing.
- Remove the back housing of the camera by lifting it directly up.
- The back cover may be slightly tight, therefore more force may be needed to lift it up.
After removing the screws, use a metal spudger or plastic opening tool to push the back cover out.
The metal spudger can damage the plastic housing, so use caution when applying any pressure to it. Use a plastic opening tool to reduce the risk of damage to the housing.
Remove the back housing of the camera by lifting it directly up.
The back cover may be slightly tight, therefore more force may be needed to lift it up.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Taibah
Member since: 02/09/2016
121 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
USF Tampa, Team 2-10, Cagle Spring 2016
Member of USF Tampa, Team 2-10, Cagle Spring 2016
USFT-CAGLE-S16S2G10
4 Members
14 Guides authored