Difficulty
Difficult
Steps
5
Time Required
15 minutes
Sections
2
- Front Panel
- 2 steps
- LCD
- 3 steps
Flags
0
BackNikon Coolpix L32
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front Panel
- Remove the six(3.93mm screws) on the outside of the camera using a Phillips 00 screwdriver.
Remove the six(3.93mm screws) on the outside of the camera using a Phillips 00 screwdriver.
1024
Step 2
- Open the battery compartment door and pull the black back face apart from the front red face.
Open the battery compartment door and pull the black back face apart from the front red face.
Step 3
LCD
- Using the spudger, gently pull the LCD screen from the tray holding it.
- Do not pull the LCD screen far from the camera because there is a ribbon cable connected to it.
Using the spudger, gently pull the LCD screen from the tray holding it.
Do not pull the LCD screen far from the camera because there is a ribbon cable connected to it.
Step 4
- Use the spudger to lift up the small white retaining flap on the motherboard that is connected to the LCD screen’s ribbon cable.
Use the spudger to lift up the small white retaining flap on the motherboard that is connected to the LCD screen’s ribbon cable.
Step 5
- With the small retaining white flap up, remove the LCD screen ribbon cable from the motherboard by sliding it out.
With the small retaining white flap up, remove the LCD screen ribbon cable from the motherboard by sliding it out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Sherika Jacobs
Member since: 09/15/2016
348 Reputation
3 Guides authored
Badges:
11
+8 more badges
Team
USF Tampa, Team 2-4, Blackwell Fall 2016
Member of USF Tampa, Team 2-4, Blackwell Fall 2016
USFT-BLACKWELL-F16S2G4
4 Members
10 Guides authored
