Difficulty

Moderate

Steps

8

Time Required

                          10 - 15 minutes

Sections

2

  • Battery
  • 2 steps
  • Back Panel
  • 6 steps

Flags

0

  • BackNikon Coolpix E5700

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Use your finger tip to slide the battery release tab toward the battery symbol on the E5700.
  • Open the battery door.

Use your finger tip to slide the battery release tab toward the battery symbol on the E5700.

Open the battery door.

1024

Step 2

  • Pull the battery out of the E5700.
  • It may be necessary to wiggle the battery while pulling to free it from its pocket in the case.

Pull the battery out of the E5700.

It may be necessary to wiggle the battery while pulling to free it from its pocket in the case.

Step 3

              Back Panel
  • Turn to the bottom of the camera.
  • Remove the two Phillips screws located directly below the back monitor

Turn to the bottom of the camera.

Remove the two Phillips screws located directly below the back monitor

Step 4

  • Turn the camera to the side with the memory card slot and open the compartment for the CF card.
  • Remove the top two Phillips screws closest to the back panel.

Turn the camera to the side with the memory card slot and open the compartment for the CF card.

Remove the top two Phillips screws closest to the back panel.

Step 5

  • Turn to the back of the camera.
  • Remove the top most Phillips screw on the back panel.

Turn to the back of the camera.

Remove the top most Phillips screw on the back panel.

Step 6

  • Turn to the last side of the back panel.
  • Remove the Phillips screw below the eyepiece.
  • Remove the Phillips screw located above the speaker.

Turn to the last side of the back panel.

Remove the Phillips screw below the eyepiece.

Remove the Phillips screw located above the speaker.

Step 7

  • Gently begin to remove the back panel.
  • Caution: There are two bundles of wires connecting the back panel to the camera. Be sure not to pull too hard and yank these out.

Gently begin to remove the back panel.

Caution: There are two bundles of wires connecting the back panel to the camera. Be sure not to pull too hard and yank these out.

Step 8

  • Now gently unplug the two wires at the bottom of the panel.

Now gently unplug the two wires at the bottom of the panel.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 6 other contributors 


                    Raana

Member since: 04/12/2011

78 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team 24-58, Amido Spring 2011                        

                                                  Member of Cal Poly, Team 24-58, Amido Spring 2011 



                    CPSU-AMIDO-S11S24G58                     


                                            4 Members                     


                                            18 Guides authored