Difficulty

Difficult

Steps

6

Time Required

                          10 minutes

Sections

1

  • LCD Screen
  • 6 steps

Flags

0

  • BackNikon Coolpix B700

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              LCD Screen
  • Use a Phillips screwdriver to remove the two 3.5mm screws at the top and bottom of the LCD Screen.

Use a Phillips screwdriver to remove the two 3.5mm screws at the top and bottom of the LCD Screen.

1024

Step 2

  • Use a Phillips screwdriver to remove the two 3.5mm screws on both sides of the side of the screen.

Use a Phillips screwdriver to remove the two 3.5mm screws on both sides of the side of the screen.

Step 3

  • Use to metal spudger to pry open the LCD cover. Then slide it down the length of the screen until the cover comes apart.

Use to metal spudger to pry open the LCD cover. Then slide it down the length of the screen until the cover comes apart.

Step 4

  • Use the pry tool and slide it under the black tab and lift up gently. Do this again for the other two ZIF tabs.

Use the pry tool and slide it under the black tab and lift up gently. Do this again for the other two ZIF tabs.

Step 5

  • Use the solder gun and desolder the yellow and blue wires.

Use the solder gun and desolder the yellow and blue wires.

Step 6

  • Use the jimmy and slide it in between the LCD screen and lift out the LCD Screen.

Use the jimmy and slide it in between the LCD screen and lift out the LCD Screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors 


                    Carlos Salgado

Member since: 02/27/2019

1,213 Reputation

                                      7 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Purdue University Northwest, Team S4-G5, Hingst Spring 2019                        

                                                  Member of Purdue University Northwest, Team S4-G5, Hingst Spring 2019 



                    PNW-HINGST-S19S4G5                     


                                            4 Members                     


                                            14 Guides authored

Kevin Kirkendall - Apr 9, 2020

Reply

Hi, I like the first 6 steps, but what are the rest of the steps?

gsb1306 - Jan 6, 2021

Reply

My camera the screen go’s when outside and if it cold.