Difficulty
Moderate
Steps
7
Time Required
10 minutes
Sections
1
- Back Frame Assembly
- 7 steps
Flags
0
BackNikon Coolpix B700
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Frame Assembly
- Use the Phillips screwdriver to remove the two 5.5 mm screws on the left side of the camera.
Use the Phillips screwdriver to remove the two 5.5 mm screws on the left side of the camera.
1024
Step 2
- Use the Phillips screwdriver to remove seven 5.5 mm screws from the bottom of the camera.
Use the Phillips screwdriver to remove seven 5.5 mm screws from the bottom of the camera.
Step 3
- Use the Phillips screwdriver to remove the two 5.5mm screws on the right side of the camera.
- Open the HDMI flap to remove a 5.5mm screw.
- Don’t forget to replace the hidden screw under the HDMI flap during reassembly.
Use the Phillips screwdriver to remove the two 5.5mm screws on the right side of the camera.
Open the HDMI flap to remove a 5.5mm screw.
Don’t forget to replace the hidden screw under the HDMI flap during reassembly.
Step 4
- Use the Phillips screwdriver to remove the two 5.5mm screws under the LCD panel.
Use the Phillips screwdriver to remove the two 5.5mm screws under the LCD panel.
Step 5
- Open the flash assembly and insert the spudger into the slot under the flash unit and twist.
- While twisting, pry apart the shell to split the camera in half.
Open the flash assembly and insert the spudger into the slot under the flash unit and twist.
While twisting, pry apart the shell to split the camera in half.
Step 6
- Be careful not to damage the ribbons that connect the halves together.
Be careful not to damage the ribbons that connect the halves together.
Step 7
- Place the pry tool under the black latch. Lift gently until the latch flips up.
- Gently pull the ribbon away from the latch.
- Be gentle when taking ribbons out and apart because they are fragile.
Place the pry tool under the black latch. Lift gently until the latch flips up.
Gently pull the ribbon away from the latch.
Be gentle when taking ribbons out and apart because they are fragile.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 5 other contributors
Carlos Salgado
Member since: 02/27/2019
1,213 Reputation
7 Guides authored
Badges:
10
+7 more badges
Team
Purdue University Northwest, Team S4-G5, Hingst Spring 2019
Member of Purdue University Northwest, Team S4-G5, Hingst Spring 2019
PNW-HINGST-S19S4G5
4 Members
14 Guides authored
