Featured
Featured Guide
Difficulty
Moderate
Steps
9
Time Required
10 minutes
Sections
2
- Back Cover
- 6 steps
- Front Cover
- 3 steps
Flags
1
Featured Guide
This guide has been found to be exceptionally cool by the iFixit staff.
BackNikon Coolpix 7900
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Remove the four 3.0mm screws on the bottom of the camera.
Remove the four 3.0mm screws on the bottom of the camera.
1024
Step 2
- Remove the two 3.0mm screws on the left side of the camera near the memory card compartment.
Remove the two 3.0mm screws on the left side of the camera near the memory card compartment.
Step 3
- Remove the two 3.0mm screws on the right side of the camera.
Remove the two 3.0mm screws on the right side of the camera.
Step 4
- Carefully open the back cover. Take care as there are connectors still attached.
Carefully open the back cover. Take care as there are connectors still attached.
Step 5
- Disconnect the cable by pulling the head upward along the green circuit board. If you only are changing the LCD, skip this step.
Disconnect the cable by pulling the head upward along the green circuit board. If you only are changing the LCD, skip this step.
Step 6
- Disconnect the ribbon cable by grabbing the two handles and pulling it directly out of the socket. If you are only changing LCD, skip this step.
- The back cover will be disconnected from the camera
Disconnect the ribbon cable by grabbing the two handles and pulling it directly out of the socket. If you are only changing LCD, skip this step.
The back cover will be disconnected from the camera
Step 7
Front Cover
- Be careful of metallic parts which are loose and will fall out.
- Remove the two 2.5mm screws on the bottom of the left side, after having removed the back cover.
Be careful of metallic parts which are loose and will fall out.
Remove the two 2.5mm screws on the bottom of the left side, after having removed the back cover.
Step 8
Step 9
- Remove front cover.
Remove front cover.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 6 other contributors
Kaky Payne
Member since: 04/17/2012
112 Reputation
5 Guides authored
Badges:
10
+7 more badges
Team
Cal Poly, Team 12-38, Regan Spring 2012
Member of Cal Poly, Team 12-38, Regan Spring 2012
CPSU-REGAN-S12S12G38
4 Members
10 Guides authored