Difficulty
Moderate
Steps
7
Time Required
20 minutes
Sections
2
- LCD Module
- 3 steps
- Back Case
- 4 steps
Flags
1
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackNikon 1 J5
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Remove Micro SD card and Battery
- Remove Micro SD card and Battery
Remove Micro SD card and Battery
1024
Step 2
- Remove 2 screws
- Open plastic LCD connector cover
- Lift FPC connector latch
- Detach LCD FPC
Remove 2 screws
Open plastic LCD connector cover
Lift FPC connector latch
Detach LCD FPC
Step 3
- Remove 4 screws
- Remove LCD module
Remove 4 screws
Remove LCD module
Step 4
Back Case
- WARNING!!! DO NOT TOUCH THESE Solder joints!!! High Voltage up to 300V..
- Or discharge the flash condenser first, as per “Main PCB replace guide”
- Remove 3 screws
WARNING!!! DO NOT TOUCH THESE Solder joints!!! High Voltage up to 300V..
Or discharge the flash condenser first, as per “Main PCB replace guide”
Remove 3 screws
Step 5
- Left side, in connector bay, remove 2 screws.
- Bottom, reomve 2 screws
- Right side, remove 1 screw
Left side, in connector bay, remove 2 screws.
Bottom, reomve 2 screws
Right side, remove 1 screw
Step 6
- Peel here and remove 1 screw within.
Peel here and remove 1 screw within.
Step 7
- Pop open back case and remove it from body.
Pop open back case and remove it from body.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Terrance
Member since: 11/17/2009
6,193 Reputation
17 Guides authored
Badges:
22
+19 more badges
